Home :: Barrels, Moderators & Tanks

Barrels, Moderators & Tanks

Replacement Barrels & Moderators and extra air tanks
AirForce Hi-Flow Condor Air Bottle

Use with :AirForce Condor .20, .22 and .25 calibers.


Spare tanks are available for extended shooting sessions. The high flow tank is used as the standard air bottles for the Condor  .20, .22 and .25 caliber rifles. They all use the same Hi-Flow bottle.The Condor .177 however, has a different specific Hi-Flow bottle.
In addition, Hi-Flo tanks may be used with standard Talon series rifles with the addition of a striker weight.
 

$219.95
$224.95 (save 2 %)
Quantity
AirForce Hi-Flow Condor Air Bottle

Use with: Condor and CondorSS .177 caliber

Spare tanks are available for extended shooting sessions. This high flow tank is used as the standard air bottles for the Condor .177 which has a different specific Hi-Flow bottle.
In addition,
Hi-Flo tanks may be used with standard Talon series rifles with the addition of a striker weight.

$219.95
$224.95 (save 2 %)
Quantity
AirForce Hi-Flow Spin-Loc Condor Air Bottle (20,22,25)

Use with :AirForce Condor and CondorSS .20, .22 and .25 calibers.

Spare tanks are available for extended shooting sessions. The high flow tank is used as the standard air bottles for the Condor  .20, .22 and .25 caliber rifles. They all use the same Hi-Flow bottle.
In addition, Hi-Flo tanks may be used with standard Talon series rifles with the addition of a striker weight.

 

$237.95
$244.95 (save 3 %)
Quantity
AirForce Hi-Flow Spin-Loc Condor Air Bottle .177

Use with: Condor and CondorSS .177 caliber

Spare tanks are available for extended shooting sessions. This high flow tank is used as the standard air bottles for the Condor .177 which has a different specific Hi-Flow bottle.
In addition,
Hi-Flo tanks may be used with standard Talon series rifles with the addition of a striker weight.Hi-Flo tanks may be used with standard Talon series rifles with the addition of a striker weight.

$237.95
$244.95 (save 3 %)
Quantity
AirForce Sound-Loc Kit for .177 caliber shrouded, but non-baffled TalonSS Rifles

Use with: Talon, TalonSS and Condor (not CondorSS) .177 caliber

AirForce Airguns has announced the introduction of one of the most effective and technologically advanced noise reduction systems for airguns. The just unveiled Sound-Loc™ Noise Reduction System is designed specifically for AirForce’s unshrouded Talon and Condor air rifles. This system may require Condor users to switch to an 18: barrel if they wish it to be the same as the new shrouded CondorSS.

AirForce has now improved sound reduction technology with the new Sound-Loc system. Sound-Loc incorporates asymmetrical deflection of air exiting the muzzle as the gun is fired. It also includes captured air expansion and reflexive air flow which combine to decelerate air velocity and minimize the report of the rifle. These changes move AirForce from the first to the most advanced integral sound suppression system ever designed for an airgun. All new factory production of these 2 models will have the Sound-Loc system installed during manufacture. For earlier TalonSS models, AirForce is offering, for purchase, an accessory kit that allows easy and quick user installation.

"One concern we hear about often is the sound of the report and we decided it needed to be reduced.” said AirForce founder and CEO John McCaslin. “To keep it legal we needed to take advantage of our unique design and build the suppression elements as part of a purpose built integral system. “We also wanted to make sure that our existing TalonSS could be retrofitted without having to ship the gun to the factory although that service is available,” added McCaslin.

Sound-Loc is available in kit form for user installation in earlier AirForce TalonSS model air rifles. The kit includes all of the elements needed to add this advanced new technology to earlier TalonSS rifles.

AirForce pioneered airgun sound reduction with the 2000 introduction of the still popular TalonSS air rifle that offered the quietest operation of any high power pre-charged air rifle. In 2013, AirForce improves on the sound level reduction and extends that same quiet accuracy to the new CondorSS air rifle. AirForce Airguns has been innovating, designing and producing precision pre-charged air guns at their Fort Worth, Texas headquarters for over 15 years. AirForce is known for developing the most technologically advanced airgun shooting systems in the world and is the original and favorite black airgun. With a reputation for flexibility and legendary accuracy, AirForce Airguns offers a solution for just about any airgun shooting situation.


 

$81.95
$83.95 (save 2 %)
Quantity
AirForce Sound-Loc Kit for .20, .22 and .25 caliber shrouded, but non-baffled TalonSS Rifles

Use with: Talon, TalonSS and Condor (not CondorSS) .20, .22 and .25 caliber

 

AirForce Airguns has announced the introduction of one of the most effective and technologically advanced noise reduction systems for airguns. The just unveiled Sound-Loc™ Noise Reduction System is designed specifically for AirForce’s TalonSS and CondorSS air rifles in .20, .22 and .25 caliber.

AirForce has now improved sound reduction technology with the new Sound-Loc system. Sound-Loc incorporates asymmetrical deflection of air exiting the muzzle as the gun is fired. It also includes captured air expansion and reflexive air flow which combine to decelerate air velocity and minimize the report of the rifle. These changes move AirForce from the first to the most advanced integral sound suppression system ever designed for an airgun.

All new factory production of these 2 models will have the Sound-Loc system installed during manufacture. For earlier TalonSS models, AirForce is offering, for purchase, an accessory kit that allows easy and quick user installation.

“One concern we hear about often is the sound of the report and we decided it needed to be reduced.” said AirForce founder and CEO John McCaslin. “To keep it legal we needed to take advantage of our unique design and build the suppression elements as part of a purpose built integral system.”

“We also wanted to make sure that our existing TalonSS could be retrofitted without having to ship the gun to the factory although that service is available,” added McCaslin.

Sound-Loc is available in kit form for user installation in earlier AirForce TalonSS model air rifles. The kit includes all of the elements needed to add this advanced new technology to earlier TalonSS rifles.

AirForce pioneered airgun sound reduction with the 2000 introduction of the still popular TalonSS air rifle that offered the quietest operation of any high power pre-charged air rifle. In 2013, AirForce improves on the sound level reduction and extends that same quiet accuracy to the new CondorSS air rifle.

AirForce Airguns has been innovating, designing and producing precision pre-charged air guns at their Fort Worth, Texas headquarters for over 15 years. AirForce is known for developing the most technologically advanced airgun shooting systems in the world and is the original and favorite black airgun. With a reputation for flexibility and legendary accuracy, AirForce Airguns offers a solution for just about any airgun shooting situation.


 

$81.95
$83.95 (save 2 %)
Quantity
AirForce Spin-Loc Spare Tank

AirForce Spin-Loc Spare Tank - Talon

Spare tanks are available for extended shooting sessions. This newest AirForce tank can be used as a spare tank for the Talon or TalonSS. Spin-Loc tanks feature a gauge and a quick fill nipple.

$219.95
$224.95 (save 2 %)
Quantity
FX Stackable Moderator

FX Wildcat Stackable Moderator

The six part moderator is available in .177, .22, & 25
The moderator consists of Section 1, the 120mm threaded muzzle end, Middle Section of four baffled units Section 6 the End Cap.
This moderator will fit the FX Wildcat .177 ,.22 and .25 or rifles with the 120mm thread count on a male thread.  This moderator will not fit the Wildcat .25 Compact or Wildcat .30 which use the Impact moderator.

$95.00
$120.00 (save 21 %)
Quantity
FX Stackable Moderator Baffle

FX Stackable Moderator Baffle Component


This is the middle baffle section of the FX Stackable Moderator.  You can add one or more of these units to create your own level of quiet. These sections work in conjunction with Section 1 and the section 6.  A typical moderator consists of four middle baffle sections.  This unit is used with the Wildcat or the 1/2 UNF base (section one) which attaches to your rifle, and the caliber specific section 6 end cap . These moderator sections will not fit the Wildcat .25 Compact or Wildcat .30 base unit or end cap which use the Impact moderator.

$15.99
$19.99 (save 20 %)
Quantity
FX Stackable Moderator Section 1

FX Stackable Moderator Section 1


The FX Moderator Base Unit (section one) is not caliber specific.  This section will work for both the .177, .22 and .25 models of the Wildcat.

The FX Wildcat .22 ships without the base section (section 1) or end cap (section 6) of the moderator. If you are installing a new moderator by sections you will need to have section 1 the base section. To this you can add the baffle sections and finally the end cap (section 6). To reduce the report making your air rifle back yard friendly you need to add the middle components (baffles) to your .22 caliber Wildcat and the end cap (section 6).
Note this moderator is made for and fits the FX Wildcat and other guns with a 120mm threaded male end.

** This moderator will fit the FX Wildcat .177, .22 and .25 or rifles with the 120mm thread count on a male thread.  This moderator will not fit the Wildcat .25 Compact or Wildcat .30 which use the Impact moderator.

$15.99
$19.99 (save 20 %)
Quantity
FX Stackable Moderator Section 6

FX Stackable Moderator Section 6

The FX Moderator is used to reduce the report of your air rifle making it backyard friendly.

This End Cap (section 6) is added to the baffle or base sections to cap your moderator for a clean look.
This is a caliber specific unit for the FX Stackable Moderator.  This section attaches to the Base unit (section 1) or the Baffle section (middle section).  Order your end cap based on the caliber of your gun.

FX Wildcat .25 ships with the base section (section 1) and the end cap (section 6) of the moderator. You only need this section if you need a replacement for your original End Cap section 6.
Note this moderator is made for and fits the FX Wildcat moderator system.

** This moderator will fit the FX Wildcat .177, .22 and .25 and must thread onto the Base (section 1 or the Middle baffle section.   This moderator will not fit the Wildcat .25 Compact or Wildcat .30 which use the Impact moderator.

$15.99
$19.99 (save 20 %)
Quantity
FX-Carbon 480cc Bottle

FX Carbon Fiber 480cc Bottle

Replacement 480cc carbon fiber bottle for the FX Impact and FX Crown

$299.99
$349.99 (save 14 %)
Quantity
FX-DFL Moderator Dreamline

Moderator for Dreamline.

Moderators made by DonnyFL for FX.  The 1/2" UNF model fits the FX Dreamline.

In addition to the FX Dreamline the moderator will fit on many European pcps.
Select model for caliber .22-.25 or .30 caliber.

The moderator measures 1.38"x5"

$119.99
$129.99 (save 8 %)
Quantity
FX-DFL Moderator Impact and Wildcat

Moderator for Impact and Wildcat.

Moderators made by DonnyFL for FX.  The M20x1 model fits the FX Impact and FX Wildcat.

In addition to the FX Impact and Wildcat the moderator will fit on many European pcps.
Select model for caliber .22-.25 or .30 caliber.

The moderator measures 1.38"x5"

$119.99
$129.99 (save 8 %)
Quantity
Smooth Twist X Barrel Kits

Smooth Twist X Barrel Kits, Impact & Wildcat .177, .22, .25, .30

Smooth Twist X Barrel kits are available in .177, .22, .25 & .30.  The barrel kit allows you to upgrade your FX, Impact, Crown and Wildcat to any caliber in the Smooth Twist X Barrel Line and several barrel lengths.  This flexibility will allow you to customize your FX rifle to your individual needs.

Each barrel Kit comes with the Barrel, Liner A and Pellet Probe.

The barrels listed here are for the FX Impact and FX Wildcat.

These are the originally installed barrel lengths for each caliber of Impact.

.177 - 500mm
.22 - 500mm
.25 - 600mm
.30 - 600mm
 

Available Impact STX barrel Kits
.177 - 500mm

.22 - 500mm
.22 - 600mm

.25 - 600mm
.25 - 700mm

.30 - 600mm
.30 - 700mm

$399.99
$499.99 (save 20 %)
Quantity
Smooth Twist X Barrel Kits

Smooth Twist X Barrel Kits, Crown .177, .22, .25, .30

Smooth Twist X Barrel kits are available in .177, .22, .25 & .30.  The barrel kit allows you to upgrade your FX, Impact, Crown and Wildcat to any caliber in the Smooth Twist X Barrel Line and several barrel lengths.  This flexibility will allow you to customize your FX rifle to your individual needs.

Each barrel Kit comes with the Barrel, Liner A and Pellet Probe.

The barrels listed here are for the Crown.

These are the originally installed barrel lengths for each caliber of Crown.

.177 - 500mm
.22 - 500mm
.25 - 600mm
.30 - 600mm
 

Available Crown STX barrel Kits
.177 - 500mm
.22 - 500mm

.22 - 600mm
.25 - 600mm
.30 - 600mm

$399.99
Quantity
STX Barrel Liner A

FX Smooth Twist X Barrel Liner A

The FX STX Pellet Liner A, is the original Smooth Twist X barrel liner. This liner is currently shipped with all FX Crown & FX Impact rifles*.
This pellet liner works partcularly well with standard JSB pellets (as listed below).
It has also proven itself to work extremely well with other manufacturers pellets for each particular caliber.

Use these liners when changing/testing a different pellet or changing your gun from the Smooth Twist barrel liners to the Smooth Twist X barrel liners.
 

.177 caliber
JSB Diabolo Exact 8.4gr

.22 caliber
JSB Diabolo Exact Jumbo 15.89gr &
JSB Diabolo Exact Jumbo Heavy 18.13gr

.25 caliber
JSB Diabolo Exact King 25.39gr
JSB Diabolo Exact King Heavy MKII 33.95gr

.30 caliber
JSB Diabolo Exact 44.75gr &
JSB Diabolo Exact 50.15

* The FX Impact, Crown and Wildcat .30 ship standard with the Smooth Twist X Barrel, which includes the Smooth Twist X  "A" barrel liner.
The FX Wildcat & FX Dreamline come standard with the FX Smooth Twist X barrel system  which includes the smooth twist barrel liner. This is not the Smooth Twist X "A" liner.
The STX Pellet Liner A, Liner B and Slug Liner are available upgrades for these rifles.

The "A" liner is included as the original barrel liner in all of the Impact, Crown and .30 Wildcat guns. 
The liner alternative for the Impact, Crown or Wildcat .30 would be to change to the B liner or Slug liner.
The Wildcat (.177, .22, .25) and Dreamline can change to the X barrels by purchasing the A Liner, B Liner or Slug Liner and using it with the original barrel shipped on the gun.
Changing your airguns caliber requires a new barrel kit i.e. changing from a .22 to .25 require the .25 barrel kit and then any additional B Liners or Slug Liners you may want.
 
Listed below are the barrel liners and the guns they work with, based on the original barrel length. 
If you want to change the barrel liner length you need to match the barrels length (i.e. 500-500 not 500-600) so make sure you have the correct length barrel installed for your liner.
 
500mm - .177, .22 Crown & Wildcat
500mm - .177 Impact
500mm -  .25 Wildcat Compact
600mm - .22 Impact
600mm - .25 & .30 Crown & Impact
600mm - .25 Wildcat
700mm - .30 Wildcat
700mm - .22, .25, .30 All Impact, Crown & Wildcats with 700mm barrel installed
$109.99
$129.99 (save 15 %)
Quantity
STX Barrel Slug Liner A

FX Smooth Twist X Barrel Slug Liner A

The initial round of FX Smooth Twist X Slug liners have been developed around the Nielson Specialty Ammo line of precision hunting slugs (picked due to the demand from the market place).
These liners will work well with any quality slug made to these specifics:

1 - Bore dimension listed below
2 - Listed weight range
3 - Correct regulator setting

.22 caliber - 21-28gr slugs sized .218
.25 caliber - 34-40gr slugs sized .250


FX recognizes that there are other equally comparable precision slug manufacturers and we will continue to develop slug liners to add to the
series. They will also work to add additional caliber options.

Lighter slugs will shoot better out of shorter 500mm barrels.
Heavier boat tail shaped slugs may not fit in the current magazine design and will need to be single
loaded. For optimum accuracy, only use swaged slugs sized correctly to the bore.


* The FX Impact, Crown and Wildcat .30 ship standard with the Smooth Twist X Barrel, which includes the Smooth Twist X  "A" barrel  liner.
The FX Wildcat & FX Dreamline come standard with the FX Smooth Twist X barrel system  which includes the smooth twist barrel liner. This is not the Smooth Twist X "A" liner.
The STX Pellet Liner A, Liner B and Slug Liner are available upgrades for these rifles.

The "A" liner is included as the original barrel and liner in all of the Impact, Crown guns. 
The liner alternative for the Impact and Crown would be to change to the B liner or Slug liner.
The Wildcat and Dreamline can change to the X barrels by purchasing the A Liner, B Liner or Slug Liner and using it with the original barrel shipped on the gun.
Changing your airguns caliber requires a new barrel kit i.e. changing from a .22 to .25 require the .25 barrel kit and then any additional B Liners or Slug Liners you may want.
 
Listed below are the barrel liners and the guns they will work with, based on the original barrel length. 
If you want to change the barrel liner length you need to match the barrels length (i.e. 500-500 not 500-600) so make sure you have the correct length barrel installed.
 
500mm -  .22 Crown & Wildcat
500mm -  .25 Wildcat Compact
600mm - .22  Wildcat, Crown & Impact
600mm - .25 Wildcat, Crown & Impact
700mm - .22 & .25, All Impact, Crown & Wildcats with 700mm barrel installed
$109.99
$129.99 (save 15 %)
Quantity

Bestsellers

AirForce Hi-Flow Condor Air Bottle

Use with :AirForce Condor .20, .22 and .25 calibers.


Spare tanks are available for extended shooting sessions. The high flow tank is used as the standard air bottles for the Condor  .20, .22 and .25 caliber rifles. They all use the same Hi-Flow bottle.The Condor .177 however, has a different specific Hi-Flow bottle.
In addition, Hi-Flo tanks may be used with standard Talon series rifles with the addition of a striker weight.
 

$219.95
$224.95 (save 2 %)
Quantity
AirForce Hi-Flow Spin-Loc Condor Air Bottle (20,22,25)

Use with :AirForce Condor and CondorSS .20, .22 and .25 calibers.

Spare tanks are available for extended shooting sessions. The high flow tank is used as the standard air bottles for the Condor  .20, .22 and .25 caliber rifles. They all use the same Hi-Flow bottle.
In addition, Hi-Flo tanks may be used with standard Talon series rifles with the addition of a striker weight.

 

$237.95
$244.95 (save 3 %)
Quantity
AirForce Sound-Loc Kit for .20, .22 and .25 caliber shrouded, but non-baffled TalonSS Rifles

Use with: Talon, TalonSS and Condor (not CondorSS) .20, .22 and .25 caliber

 

AirForce Airguns has announced the introduction of one of the most effective and technologically advanced noise reduction systems for airguns. The just unveiled Sound-Loc™ Noise Reduction System is designed specifically for AirForce’s TalonSS and CondorSS air rifles in .20, .22 and .25 caliber.

AirForce has now improved sound reduction technology with the new Sound-Loc system. Sound-Loc incorporates asymmetrical deflection of air exiting the muzzle as the gun is fired. It also includes captured air expansion and reflexive air flow which combine to decelerate air velocity and minimize the report of the rifle. These changes move AirForce from the first to the most advanced integral sound suppression system ever designed for an airgun.

All new factory production of these 2 models will have the Sound-Loc system installed during manufacture. For earlier TalonSS models, AirForce is offering, for purchase, an accessory kit that allows easy and quick user installation.

“One concern we hear about often is the sound of the report and we decided it needed to be reduced.” said AirForce founder and CEO John McCaslin. “To keep it legal we needed to take advantage of our unique design and build the suppression elements as part of a purpose built integral system.”

“We also wanted to make sure that our existing TalonSS could be retrofitted without having to ship the gun to the factory although that service is available,” added McCaslin.

Sound-Loc is available in kit form for user installation in earlier AirForce TalonSS model air rifles. The kit includes all of the elements needed to add this advanced new technology to earlier TalonSS rifles.

AirForce pioneered airgun sound reduction with the 2000 introduction of the still popular TalonSS air rifle that offered the quietest operation of any high power pre-charged air rifle. In 2013, AirForce improves on the sound level reduction and extends that same quiet accuracy to the new CondorSS air rifle.

AirForce Airguns has been innovating, designing and producing precision pre-charged air guns at their Fort Worth, Texas headquarters for over 15 years. AirForce is known for developing the most technologically advanced airgun shooting systems in the world and is the original and favorite black airgun. With a reputation for flexibility and legendary accuracy, AirForce Airguns offers a solution for just about any airgun shooting situation.


 

$81.95
$83.95 (save 2 %)
Quantity
AirForce Sound-Loc Kit for .177 caliber shrouded, but non-baffled TalonSS Rifles

Use with: Talon, TalonSS and Condor (not CondorSS) .177 caliber

AirForce Airguns has announced the introduction of one of the most effective and technologically advanced noise reduction systems for airguns. The just unveiled Sound-Loc™ Noise Reduction System is designed specifically for AirForce’s unshrouded Talon and Condor air rifles. This system may require Condor users to switch to an 18: barrel if they wish it to be the same as the new shrouded CondorSS.

AirForce has now improved sound reduction technology with the new Sound-Loc system. Sound-Loc incorporates asymmetrical deflection of air exiting the muzzle as the gun is fired. It also includes captured air expansion and reflexive air flow which combine to decelerate air velocity and minimize the report of the rifle. These changes move AirForce from the first to the most advanced integral sound suppression system ever designed for an airgun. All new factory production of these 2 models will have the Sound-Loc system installed during manufacture. For earlier TalonSS models, AirForce is offering, for purchase, an accessory kit that allows easy and quick user installation.

"One concern we hear about often is the sound of the report and we decided it needed to be reduced.” said AirForce founder and CEO John McCaslin. “To keep it legal we needed to take advantage of our unique design and build the suppression elements as part of a purpose built integral system. “We also wanted to make sure that our existing TalonSS could be retrofitted without having to ship the gun to the factory although that service is available,” added McCaslin.

Sound-Loc is available in kit form for user installation in earlier AirForce TalonSS model air rifles. The kit includes all of the elements needed to add this advanced new technology to earlier TalonSS rifles.

AirForce pioneered airgun sound reduction with the 2000 introduction of the still popular TalonSS air rifle that offered the quietest operation of any high power pre-charged air rifle. In 2013, AirForce improves on the sound level reduction and extends that same quiet accuracy to the new CondorSS air rifle. AirForce Airguns has been innovating, designing and producing precision pre-charged air guns at their Fort Worth, Texas headquarters for over 15 years. AirForce is known for developing the most technologically advanced airgun shooting systems in the world and is the original and favorite black airgun. With a reputation for flexibility and legendary accuracy, AirForce Airguns offers a solution for just about any airgun shooting situation.


 

$81.95
$83.95 (save 2 %)
Quantity
FX Stackable Moderator Baffle

FX Stackable Moderator Baffle Component


This is the middle baffle section of the FX Stackable Moderator.  You can add one or more of these units to create your own level of quiet. These sections work in conjunction with Section 1 and the section 6.  A typical moderator consists of four middle baffle sections.  This unit is used with the Wildcat or the 1/2 UNF base (section one) which attaches to your rifle, and the caliber specific section 6 end cap . These moderator sections will not fit the Wildcat .25 Compact or Wildcat .30 base unit or end cap which use the Impact moderator.

$15.99
$19.99 (save 20 %)
Quantity
FX Stackable Moderator Section 1

FX Stackable Moderator Section 1


The FX Moderator Base Unit (section one) is not caliber specific.  This section will work for both the .177, .22 and .25 models of the Wildcat.

The FX Wildcat .22 ships without the base section (section 1) or end cap (section 6) of the moderator. If you are installing a new moderator by sections you will need to have section 1 the base section. To this you can add the baffle sections and finally the end cap (section 6). To reduce the report making your air rifle back yard friendly you need to add the middle components (baffles) to your .22 caliber Wildcat and the end cap (section 6).
Note this moderator is made for and fits the FX Wildcat and other guns with a 120mm threaded male end.

** This moderator will fit the FX Wildcat .177, .22 and .25 or rifles with the 120mm thread count on a male thread.  This moderator will not fit the Wildcat .25 Compact or Wildcat .30 which use the Impact moderator.

$15.99
$19.99 (save 20 %)
Quantity
FX Stackable Moderator Section 6

FX Stackable Moderator Section 6

The FX Moderator is used to reduce the report of your air rifle making it backyard friendly.

This End Cap (section 6) is added to the baffle or base sections to cap your moderator for a clean look.
This is a caliber specific unit for the FX Stackable Moderator.  This section attaches to the Base unit (section 1) or the Baffle section (middle section).  Order your end cap based on the caliber of your gun.

FX Wildcat .25 ships with the base section (section 1) and the end cap (section 6) of the moderator. You only need this section if you need a replacement for your original End Cap section 6.
Note this moderator is made for and fits the FX Wildcat moderator system.

** This moderator will fit the FX Wildcat .177, .22 and .25 and must thread onto the Base (section 1 or the Middle baffle section.   This moderator will not fit the Wildcat .25 Compact or Wildcat .30 which use the Impact moderator.

$15.99
$19.99 (save 20 %)
Quantity

New Arrivals

FX Stackable Moderator

FX Wildcat Stackable Moderator

The six part moderator is available in .177, .22, & 25
The moderator consists of Section 1, the 120mm threaded muzzle end, Middle Section of four baffled units Section 6 the End Cap.
This moderator will fit the FX Wildcat .177 ,.22 and .25 or rifles with the 120mm thread count on a male thread.  This moderator will not fit the Wildcat .25 Compact or Wildcat .30 which use the Impact moderator.

$95.00
$120.00 (save 21 %)
Quantity
Smooth Twist X Barrel Kits

Smooth Twist X Barrel Kits, Crown .177, .22, .25, .30

Smooth Twist X Barrel kits are available in .177, .22, .25 & .30.  The barrel kit allows you to upgrade your FX, Impact, Crown and Wildcat to any caliber in the Smooth Twist X Barrel Line and several barrel lengths.  This flexibility will allow you to customize your FX rifle to your individual needs.

Each barrel Kit comes with the Barrel, Liner A and Pellet Probe.

The barrels listed here are for the Crown.

These are the originally installed barrel lengths for each caliber of Crown.

.177 - 500mm
.22 - 500mm
.25 - 600mm
.30 - 600mm
 

Available Crown STX barrel Kits
.177 - 500mm
.22 - 500mm

.22 - 600mm
.25 - 600mm
.30 - 600mm

$399.99
Quantity
Smooth Twist X Barrel Kits

Smooth Twist X Barrel Kits, Impact & Wildcat .177, .22, .25, .30

Smooth Twist X Barrel kits are available in .177, .22, .25 & .30.  The barrel kit allows you to upgrade your FX, Impact, Crown and Wildcat to any caliber in the Smooth Twist X Barrel Line and several barrel lengths.  This flexibility will allow you to customize your FX rifle to your individual needs.

Each barrel Kit comes with the Barrel, Liner A and Pellet Probe.

The barrels listed here are for the FX Impact and FX Wildcat.

These are the originally installed barrel lengths for each caliber of Impact.

.177 - 500mm
.22 - 500mm
.25 - 600mm
.30 - 600mm
 

Available Impact STX barrel Kits
.177 - 500mm

.22 - 500mm
.22 - 600mm

.25 - 600mm
.25 - 700mm

.30 - 600mm
.30 - 700mm

$399.99
$499.99 (save 20 %)
Quantity
STX Barrel Slug Liner A

FX Smooth Twist X Barrel Slug Liner A

The initial round of FX Smooth Twist X Slug liners have been developed around the Nielson Specialty Ammo line of precision hunting slugs (picked due to the demand from the market place).
These liners will work well with any quality slug made to these specifics:

1 - Bore dimension listed below
2 - Listed weight range
3 - Correct regulator setting

.22 caliber - 21-28gr slugs sized .218
.25 caliber - 34-40gr slugs sized .250


FX recognizes that there are other equally comparable precision slug manufacturers and we will continue to develop slug liners to add to the
series. They will also work to add additional caliber options.

Lighter slugs will shoot better out of shorter 500mm barrels.
Heavier boat tail shaped slugs may not fit in the current magazine design and will need to be single
loaded. For optimum accuracy, only use swaged slugs sized correctly to the bore.


* The FX Impact, Crown and Wildcat .30 ship standard with the Smooth Twist X Barrel, which includes the Smooth Twist X  "A" barrel  liner.
The FX Wildcat & FX Dreamline come standard with the FX Smooth Twist X barrel system  which includes the smooth twist barrel liner. This is not the Smooth Twist X "A" liner.
The STX Pellet Liner A, Liner B and Slug Liner are available upgrades for these rifles.

The "A" liner is included as the original barrel and liner in all of the Impact, Crown guns. 
The liner alternative for the Impact and Crown would be to change to the B liner or Slug liner.
The Wildcat and Dreamline can change to the X barrels by purchasing the A Liner, B Liner or Slug Liner and using it with the original barrel shipped on the gun.
Changing your airguns caliber requires a new barrel kit i.e. changing from a .22 to .25 require the .25 barrel kit and then any additional B Liners or Slug Liners you may want.
 
Listed below are the barrel liners and the guns they will work with, based on the original barrel length. 
If you want to change the barrel liner length you need to match the barrels length (i.e. 500-500 not 500-600) so make sure you have the correct length barrel installed.
 
500mm -  .22 Crown & Wildcat
500mm -  .25 Wildcat Compact
600mm - .22  Wildcat, Crown & Impact
600mm - .25 Wildcat, Crown & Impact
700mm - .22 & .25, All Impact, Crown & Wildcats with 700mm barrel installed
$109.99
$129.99 (save 15 %)
Quantity
FX-DFL Moderator Dreamline

Moderator for Dreamline.

Moderators made by DonnyFL for FX.  The 1/2" UNF model fits the FX Dreamline.

In addition to the FX Dreamline the moderator will fit on many European pcps.
Select model for caliber .22-.25 or .30 caliber.

The moderator measures 1.38"x5"

$119.99
$129.99 (save 8 %)
Quantity
FX-DFL Moderator Impact and Wildcat

Moderator for Impact and Wildcat.

Moderators made by DonnyFL for FX.  The M20x1 model fits the FX Impact and FX Wildcat.

In addition to the FX Impact and Wildcat the moderator will fit on many European pcps.
Select model for caliber .22-.25 or .30 caliber.

The moderator measures 1.38"x5"

$119.99
$129.99 (save 8 %)
Quantity