Home :: Mounts/Risers 1 Piece :: Fixed 1 Piece Drooper Mounts

Fixed 1 Piece Drooper Mounts

Fixed 1 Piece Drooper Mounts
BKL-260D7 1 Piece Mount

Fixed 1 Piece High 1" (Rings) 11mm (Base) Drooper Mount

When it comes to holding power there is no better mount on the market than the BKL-260 series.  Put this, one piece six screw scope mount on any magnum airgun, elephant gun or sherman tank and forget about it, this mount is not going anywhere. 

BKL offers the 260, 1 piece scope mounts in 3 configurations. Choose between the medium, high or drooper version. These mounts all have 6 side screws to solidly fasten the mount onto the dovetail or scope rail. These mounts are ultra sturdy, dependable and have great holding power. Once tightened onto a dovetail or scope rail, they simply don't move.  Combine the griping power with the self centering mounting system and they do not come any better than the BKL line of mounts

007" Drop Compensated (D7) = 7 thousandths per inch of drop compensation

BENEFITS
Raises your group so that you don't run out of vertical adjustment
Keeps you closer to the optical center

BKL's D7 Drop Compensation Table

$56.95
$60.00 (save 5 %)
Quantity
Leapers DNT06 1 Piece Droop Riser for RWS TO6 Triggers

Fixed 1 Piece High Picatinny (Top) 11mm (Base) Droop Riser for RWS Rifles with TO6 Triggers

This mount base is fixed but provides droop compensation for RWS rifles with TO6 triggers.  Be aware that barrel droop does not affect accuracy or velocity. It's really more of a scope issue than a gun issue. Scopes simply don't have enough clicks of adjustment to compensate for barrel droop at closer airgun ranges. These bases are made to be used with Weaver style mounts such as the Leapers 2 pc. 30mm or 1 Inch Weaver mounts.
  This base has the following features:

  1. Works with RWS rifles with the TO6 trigger
  2. Dual Stop Pins to Prevent Bi-directional Recoil
  3. Four High Strength Screws to Ensure Solid Locking
  4. Converts 9-11mm Scope Rails to Picatinny/Weaver Rail for Most Versatile Accessory Applications
  5. 11 Picatinny Slots on Top Rail to Provide Flexible Eye Relief Adjustment
  6. 5" Overall Length
  7. 10" of Upward Compensation at 30 yards
     
$18.00
Quantity
RWS 230-0596 1 Piece Mount 1"

Fixed 1 Piece High 1" (Rings) 11mm (Base) Drooper Mount

These mounts are designed specifically to be used with RWS rifles. RWS rifles are known to have barrel droop and these mounts were designed to counteract the droop. The mounts are fixed so there are no small screws to loosen up over time and there is .025" of droop compensation built in. The mounts also feature 2 stop pins that lower into the 2 indentations on RWS scope rails.  The mount is available with 1" rings or 30mm rings.

$35.00
Quantity
RWS 230-0597 1 Piece Mount 30mm

Fixed 1 Piece High 30mm (Rings) 11mm (Base) Drooper Mount

These mounts are designed specifically to be used with RWS rifles. RWS rifles are known to have barrel droop and these mounts were designed to counteract the droop. The scopes are fixed so there are no small screws to loosen up over time and there is .025" of droop compensation built in. The mounts also feature 2 stop pins that lower into the 2 indentations on RWS scope rails. The mount is available with 1" rings or 30mm rings.

$35.00
Quantity

Bestsellers

BKL-260D7 1 Piece Mount

Fixed 1 Piece High 1" (Rings) 11mm (Base) Drooper Mount

When it comes to holding power there is no better mount on the market than the BKL-260 series.  Put this, one piece six screw scope mount on any magnum airgun, elephant gun or sherman tank and forget about it, this mount is not going anywhere. 

BKL offers the 260, 1 piece scope mounts in 3 configurations. Choose between the medium, high or drooper version. These mounts all have 6 side screws to solidly fasten the mount onto the dovetail or scope rail. These mounts are ultra sturdy, dependable and have great holding power. Once tightened onto a dovetail or scope rail, they simply don't move.  Combine the griping power with the self centering mounting system and they do not come any better than the BKL line of mounts

007" Drop Compensated (D7) = 7 thousandths per inch of drop compensation

BENEFITS
Raises your group so that you don't run out of vertical adjustment
Keeps you closer to the optical center

BKL's D7 Drop Compensation Table

$56.95
$60.00 (save 5 %)
Quantity
RWS 230-0596 1 Piece Mount 1"

Fixed 1 Piece High 1" (Rings) 11mm (Base) Drooper Mount

These mounts are designed specifically to be used with RWS rifles. RWS rifles are known to have barrel droop and these mounts were designed to counteract the droop. The mounts are fixed so there are no small screws to loosen up over time and there is .025" of droop compensation built in. The mounts also feature 2 stop pins that lower into the 2 indentations on RWS scope rails.  The mount is available with 1" rings or 30mm rings.

$35.00
Quantity
RWS 230-0597 1 Piece Mount 30mm

Fixed 1 Piece High 30mm (Rings) 11mm (Base) Drooper Mount

These mounts are designed specifically to be used with RWS rifles. RWS rifles are known to have barrel droop and these mounts were designed to counteract the droop. The scopes are fixed so there are no small screws to loosen up over time and there is .025" of droop compensation built in. The mounts also feature 2 stop pins that lower into the 2 indentations on RWS scope rails. The mount is available with 1" rings or 30mm rings.

$35.00
Quantity
Leapers DNT06 1 Piece Droop Riser for RWS TO6 Triggers

Fixed 1 Piece High Picatinny (Top) 11mm (Base) Droop Riser for RWS Rifles with TO6 Triggers

This mount base is fixed but provides droop compensation for RWS rifles with TO6 triggers.  Be aware that barrel droop does not affect accuracy or velocity. It's really more of a scope issue than a gun issue. Scopes simply don't have enough clicks of adjustment to compensate for barrel droop at closer airgun ranges. These bases are made to be used with Weaver style mounts such as the Leapers 2 pc. 30mm or 1 Inch Weaver mounts.
  This base has the following features:

  1. Works with RWS rifles with the TO6 trigger
  2. Dual Stop Pins to Prevent Bi-directional Recoil
  3. Four High Strength Screws to Ensure Solid Locking
  4. Converts 9-11mm Scope Rails to Picatinny/Weaver Rail for Most Versatile Accessory Applications
  5. 11 Picatinny Slots on Top Rail to Provide Flexible Eye Relief Adjustment
  6. 5" Overall Length
  7. 10" of Upward Compensation at 30 yards
     
$18.00
Quantity