Home :: Mounts/Risers 1 Piece :: Fixed 1 Piece Offset Mounts

Fixed 1 Piece Offset Mounts

Fixed 1 Piece Offset Mounts
BKL-254 1 Piece Mount

Fixed 1 Piece Medium 1" (Rings) 11mm (Base) Offset Mount

BKL offers the 254 1 piece, cantilevered scope mounts in 3 configurations. Choose between the fixed medium, high or drooper version. The offset (cantilevered) mounts are excellent for use with very short scopes. Very often short scopes cannot be pulled back far enough to allow for proper eye relief. Using an offset (cantilevered) mount allow the scope to be mounted farther back than is possible with a standard mount.
These mounts are sturdy, dependable and have great holding power.
The 254 is a medium high fixed mount to be used with scopes tobjectives up to 45mm
The 254H is a high fixed mount to be used with scopes objectives up to 56mm
The 254D7 is a high mount with .007" droop compensation built in and can be used with scopes objectives up to 56mm

$38.00
Quantity
BKL-254D7 1 Piece Mount

Fixed 1 Piece High 1" (Rings) 11mm (Base) Offset Mount

BKL offers the 254 1 piece, cantilevered scope mounts in 3 configurations. Choose between the fixed medium, high or drooper version. The offset (cantilevered) mounts are excellent for use with very short scopes. Very often short scopes cannot be pulled back far enough to allow for proper eye relief. Using an offset (cantilevered) mount allow the scope to be mounted farther back than is possible with a standard mount.
These mounts are sturdy, dependable and have great holding power.
The 254 is a medium high fixed mount to be used with scopes tobjectives up to 45mm
The 254H is a high fixed mount to be used with scopes objectives up to 56mm
The 254D7 is a high mount with .007" droop compensation built in and can be used with scopes objectives up to 56mm

$47.50
$50.00 (save 5 %)
Quantity
BKL-254H 1 Piece Mount

Fixed 1 Piece High 1" (Rings) 11mm (Base) Offset Mount

BKL offers the 254 1 piece, cantilevered scope mounts in 3 configurations. Choose between the fixed medium, high or drooper version. The offset (cantilevered) mounts are excellent for use with very short scopes. Very often short scopes cannot be pulled back far enough to allow for proper eye relief. Using an offset (cantilevered) mount allow the scope to be mounted farther back than is possible with a standard mount.
These mounts are sturdy, dependable and have great holding power.
The 254 is a medium high fixed mount to be used with scopes tobjectives up to 45mm
The 254H is a high fixed mount to be used with scopes objectives up to 56mm
The 254D7 is a high mount with .007" droop compensation built in and can be used with scopes objectives up to 56mm

$45.00
Quantity
BKL-354 1 Piece Mount

Fixed 1 Piece Medium 30mm (Rings) 11mm (Base) Offset Mount

The BKL 354 1 piece, 30mm cantilevered (offset) scope mounts is excellent for use with very short scopes. Very often short scopes cannot be pulled back far enough to allow for proper eye relief. Using an offset (cantilevered) mount allows the scope to be mounted farther back than is possible with a standard mount.

These mounts are sturdy, dependable and have great holding power.   The 354 is a medium high fixed mount to be used with scopes tobjectives up to 45mm

$57.00
$60.00 (save 5 %)
Quantity
Leapers RGPMOFS38-25H4 1 Piece Mount

Fixed 1 Piece High 1" (Rings) 11mm (Base) Mount

These mounts are designed to be used with very long or very short, compact scopes that have a one inch tube body and an objective up to 50 mm. This mount is great with airguns as it has two integral recoil pins which can be used to prevent the mount from sliding. The stop pins are built into the base of the mount and are threaded. They are adjusted from the top using an allen wrench (provided with mount) and either recoil pin can be used. The one that is not needed can simply be screwed up into the mount body. The reason the mount has two stop pins is that the offset can be pointed forward if used with long scopes or backwards if used with short compact scopes and the two stop pins allow one or the other recoil pin to be in position regardless of the offset direction. The four screws on the split rings and two clamping screws on the side give a secure grip when used on guns with even the most punishing recoil.

$21.95
Quantity

Bestsellers

Leapers RGPMOFS38-25H4 1 Piece Mount

Fixed 1 Piece High 1" (Rings) 11mm (Base) Mount

These mounts are designed to be used with very long or very short, compact scopes that have a one inch tube body and an objective up to 50 mm. This mount is great with airguns as it has two integral recoil pins which can be used to prevent the mount from sliding. The stop pins are built into the base of the mount and are threaded. They are adjusted from the top using an allen wrench (provided with mount) and either recoil pin can be used. The one that is not needed can simply be screwed up into the mount body. The reason the mount has two stop pins is that the offset can be pointed forward if used with long scopes or backwards if used with short compact scopes and the two stop pins allow one or the other recoil pin to be in position regardless of the offset direction. The four screws on the split rings and two clamping screws on the side give a secure grip when used on guns with even the most punishing recoil.

$21.95
Quantity
BKL-354 1 Piece Mount

Fixed 1 Piece Medium 30mm (Rings) 11mm (Base) Offset Mount

The BKL 354 1 piece, 30mm cantilevered (offset) scope mounts is excellent for use with very short scopes. Very often short scopes cannot be pulled back far enough to allow for proper eye relief. Using an offset (cantilevered) mount allows the scope to be mounted farther back than is possible with a standard mount.

These mounts are sturdy, dependable and have great holding power.   The 354 is a medium high fixed mount to be used with scopes tobjectives up to 45mm

$57.00
$60.00 (save 5 %)
Quantity
BKL-254 1 Piece Mount

Fixed 1 Piece Medium 1" (Rings) 11mm (Base) Offset Mount

BKL offers the 254 1 piece, cantilevered scope mounts in 3 configurations. Choose between the fixed medium, high or drooper version. The offset (cantilevered) mounts are excellent for use with very short scopes. Very often short scopes cannot be pulled back far enough to allow for proper eye relief. Using an offset (cantilevered) mount allow the scope to be mounted farther back than is possible with a standard mount.
These mounts are sturdy, dependable and have great holding power.
The 254 is a medium high fixed mount to be used with scopes tobjectives up to 45mm
The 254H is a high fixed mount to be used with scopes objectives up to 56mm
The 254D7 is a high mount with .007" droop compensation built in and can be used with scopes objectives up to 56mm

$38.00
Quantity
BKL-254H 1 Piece Mount

Fixed 1 Piece High 1" (Rings) 11mm (Base) Offset Mount

BKL offers the 254 1 piece, cantilevered scope mounts in 3 configurations. Choose between the fixed medium, high or drooper version. The offset (cantilevered) mounts are excellent for use with very short scopes. Very often short scopes cannot be pulled back far enough to allow for proper eye relief. Using an offset (cantilevered) mount allow the scope to be mounted farther back than is possible with a standard mount.
These mounts are sturdy, dependable and have great holding power.
The 254 is a medium high fixed mount to be used with scopes tobjectives up to 45mm
The 254H is a high fixed mount to be used with scopes objectives up to 56mm
The 254D7 is a high mount with .007" droop compensation built in and can be used with scopes objectives up to 56mm

$45.00
Quantity
BKL-254D7 1 Piece Mount

Fixed 1 Piece High 1" (Rings) 11mm (Base) Offset Mount

BKL offers the 254 1 piece, cantilevered scope mounts in 3 configurations. Choose between the fixed medium, high or drooper version. The offset (cantilevered) mounts are excellent for use with very short scopes. Very often short scopes cannot be pulled back far enough to allow for proper eye relief. Using an offset (cantilevered) mount allow the scope to be mounted farther back than is possible with a standard mount.
These mounts are sturdy, dependable and have great holding power.
The 254 is a medium high fixed mount to be used with scopes tobjectives up to 45mm
The 254H is a high fixed mount to be used with scopes objectives up to 56mm
The 254D7 is a high mount with .007" droop compensation built in and can be used with scopes objectives up to 56mm

$47.50
$50.00 (save 5 %)
Quantity