Home :: Manufacturers :: Leapers

Leapers

Leapers

Whether you're looking at a particular scope or all rifle scopes you're going to need a mount to hold the scope. Leapers makes a wide line of mounts to accomodate scopes of all types from standard rifle scopes to tactical scopes. Leapers mounts work with 1" or 30mm scope tubes and are offered in 1 piece or 2 piece choices. They will accomodate 11mm or Weaver dovetails as well. So check out the full line of Leapers mounts and you'll find one you can use with virtually any scope.

Leapers RGPM-30H4 2 Piece Mounts

Fixed, 2 Piece High 30mm (Rings) 11mm (Base) Mount

These Leapers mounts are designed to be used with all scopes that have a 30mm tube body and an objective up to 72 mm. They are great with airguns as they have an integral recoil pin (used to prevent scope creep) built into the base of one of the mounts, but the pin can be screwed up and out of the way for those who do not need to use this feature. Each ring has 4 screws to hold the scope firmly in place and the base has two heavy duty screws on the side to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.

$19.99
Quantity
Leapers RGPM-30M4 2 Piece Mounts

Fixed 2 Piece Medium 30mm (Rings) 11mm (Base) Mounts

These Leapers mounts are designed to be used with all scopes that have a 30mm tube body and an objective up to 45 mm. They are great with airguns as they have an integral recoil pin (used to prevent scope creep) built into the base of one of the mounts, but the pin can be screwed up and out of the way for those who do not need to use this feature. Each ring has 4 screws to hold the scope firmly in place and the base has two heavy duty screws on the side to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.

$19.99
Quantity
Leapers RGWM-25H4 2 Piece Mounts

Fixed 2 Piece High 1" Weaver Mount

These Leapers mounts are designed to be used with Weaver or Picitanny bases and with all scopes that have a 1 Inch tube body and an objective up to 50 mm. They are great with airguns as the Weaver base doesn't allow the rings to slip and slide. Each ring has 4 screws to hold the scope firmly in place when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as other mount available at higher prices.

$12.95
Quantity
Leapers RGWM-25M4 2 Piece Mounts

Fixed 2 Piece Medium 1" Weaver Mount

These Leapers mounts are designed to be used in conjunction with the Leapers Drooper mount base and with all scopes that have a 1 Inch tube body and an objective up to 45 mm. They are great with airguns as the Weaver base doesn't allow the rings to slip and slide. Each ring has 4 screws to hold the scope firmly in place when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as other mount available at higher prices.

$12.95
Quantity
Leapers RGWM-30H4 2 Piece Mounts

Fixed 2 Piece High 30mm (Rings) Weaver (Base) Mounts

These Leapers mounts are designed to be used with all scopes that have a 30mm tube body and an objective up to 55 mm. They are great with airguns as they have an integral recoil pin (used to prevent scope creep) built into the base of one of the mounts, but the pin can be screwed up and out of the way for those who do not need to use this feature. Each ring has 4 screws to hold the scope firmly in place and the base has two heavy duty screws on the side to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.

$12.95
Quantity
Leapers RGWM-30L4 2 Piece Mounts

Fixed 2 Piece Low 30mm (Rings) Weaver (Base) Mounts

These Leapers mounts are designed to be used in conjunction with the Leapers Drooper mount base and with all scopes that have a 30mm tube body and an objective up to 40 mm. They are great with airguns as the Weaver base doesn't allow the mounts to slip and slide. Each ring has 4 screws to hold the scope firmly in place when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as other mount available at higher prices.

$12.95
Quantity
Leapers RGWM-30M4 2 Piece Mounts

Fixed 2 Piece Medium 30mm (Rings) Weaver (Base) Mounts

These Leapers mounts are designed to be used with all scopes that have a 30mm tube body and an objective up to 45 mm. They are great with airguns as they have an integral recoil pin (used to prevent scope creep) built into the base of one of the mounts, but the pin can be screwed up and out of the way for those who do not need to use this feature. Each ring has 4 screws to hold the scope firmly in place and the base has two heavy duty screws on the side to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.

$12.95
Quantity
Leapers RQ2W3104 2 Piece Quick Release Mounts 30mm Low

Fixed 2 Piece Low 30mm (Rings) Weaver (Base) Quick Release Mounts

These Leapers mounts are designed to be used with all scopes that have a 30mm tube body. They are great with airguns that have Picatinny or Weaver scope rails.  Each ring has 4 screws to hold the scope firmly in place and the base features a quick detach lever for attaching to any Picatinny or Weaver rail or dovetail. The tension on the quick detach lever can be adjusted tighter or looser as needed to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.
 

•  4-screw Low Profile Ring
•  Precision Machined from Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish
•  User Friendly Quick Detach Lever Lock with Full Adjustability to fit on any Picatinny or Weaver Rail
•  Innovative Robust Recoil-proof Spring Tensioned Stop-pin for Rails with or without Recess Holes
•  Spring Tension Controlled Locking Plate with Steel Insert Guarantees Most Secure Installation


 

$24.95
$34.95 (save 29 %)
Quantity
UTG 3-12x44 Etched Mil Dot

UTG 3-12x44 Ill Mil Dot Etched Reticle

•  Built on True Strength Platform, Completely Sealed and Nitrogen Filled, Shockproof, Fogproof and Rainproof
•  30mm Tube with Best in Class Multi Emerald Coated Lenses to Achieve Maximum Light Transmission for Best Clarity
•  Innovative EZ-TAP® Illumination Enhancing (IE) System with Red/Green Dual-Color Mode and 36 Color Multi-Color Mode to Accommodate All Weather/Light Conditions (U.S. Pat. 8,437,079; EU Patent Pending)
•  1-Click High-tech Illumination Memory Feature Gets You Right Back to the Color/Brightness Setting Last Used
•  Most Innovative, Low Profile Illumination Control with 2 Soft and Ergonomic Control Buttons Designed for Most Natural, Smooth and Quick-reaching Hand/Finger Operations
•  Special Circuit and Housing Design for Uninterrupted Illumination Even Under Heavy Recoil
•  Premium Zero Locking and Zero Resetting Target Turrets with Most Consistent and Precise 1/4 MOA per Click Windage/Elevation Adjustment
•  Side Wheel Adjustable Turret (SWAT) for Parallax Adjustment - from 10 Yards to Infinity; Side Wheel Ready for Optional Big Wheel to Achieve Finer Parallax Adjustment
•  Mil-dot Range Estimating Etched Glass Reticle with Built-in TactEdge® Angled Integral Sunshade for Most Optimal Aiming and Shooting Performance
•  Complete with Flip-open Lens Caps and Max Strength Twist Lock Medium Profile Rings

 

$159.97
$169.97 (save 6 %)
Quantity
UTG 3-12x44 Wire Mil Dot

UTG 3-12x44 Ill Mil Dot WireReticle

•  Built on True Strength Platform, Completely Sealed and Nitrogen Filled, Shockproof, Fogproof and Rainproof
•  30mm Tube with Best in Class Multi Emerald Coated Lenses to Achieve Maximum Light Transmission for Best Clarity
•  Innovative EZ-TAP® Illumination Enhancing (IE) System with Red/Green Dual-Color Mode and 36 Color Multi-Color Mode to Accommodate All Weather/Light Conditions (U.S. Pat. 8,437,079; EU Patent Pending)
•  1-Click High-tech Illumination Memory Feature Gets You Right Back to the Color/Brightness Setting Last Used
•  Most Innovative, Low Profile Illumination Control with 2 Soft and Ergonomic Control Buttons Designed for Most Natural, Smooth and Quick-reaching Hand/Finger Operations
•  Special Circuit and Housing Design for Uninterrupted Illumination Even Under Heavy Recoil
•  Premium Zero Locking and Zero Resetting Target Turrets with Most Consistent and Precise 1/4 MOA per Click Windage/Elevation Adjustment
•  Side Wheel Adjustable Turret (SWAT) for Parallax Adjustment - from 10 Yards to Infinity; Side Wheel Ready for Optional Big Wheel to Achieve Finer Parallax Adjustment
•  Mil-dot Range Estimating Wire Reticle with Built-in TactEdge® Angled Integral Sunshade for Most Optimal Aiming and Shooting Performance
•  Complete with Flip-open Lens Caps and Max Strength Twist Lock Medium Profile Rings

 

$129.97
$139.97 (save 7 %)
Quantity