Home :: Manufacturers :: Leapers

Leapers

Leapers

Whether you're looking at a particular scope or all rifle scopes you're going to need a mount to hold the scope. Leapers makes a wide line of mounts to accomodate scopes of all types from standard rifle scopes to tactical scopes. Leapers mounts work with 1" or 30mm scope tubes and are offered in 1 piece or 2 piece choices. They will accomodate 11mm or Weaver dovetails as well. So check out the full line of Leapers mounts and you'll find one you can use with virtually any scope.

Leapers 3/8" to Weaver Adapter

Fixed 2 Piece Medium 3/8" Base to Weaver Base Risers

General Features

This Leapers adapter is a 2 pc. 3/8" to Weaver riser meant to convert 9-11mm dovetails or scope rails to Weaver or Picatinny base. They also give extra height whenever extra height is wanted or needed.
 

* .22/Airgun Dovetail to Picatinny/Weaver Rail Adaptor
•  Innovative Rail Platform to Convert Most .22/Airgun Rails
•  Top Slot with Spring Tension Retraction/Expansion Design to Snap into Picatinny/Weaver Base
•  Extremely Low Profile and Lightweight
•  Precision and Repeatable Alignment
•  Easy Installation with Most .22/Airgun Rails, 2 PCs/Set
•  Removable Stop Pin for Extra Secure Installation


 

$12.95
Quantity
Leapers DNT06 1 Piece Droop Riser for RWS TO6 Triggers

Fixed 1 Piece High Picatinny (Top) 11mm (Base) Droop Riser for RWS Rifles with TO6 Triggers

This mount base is fixed but provides droop compensation for RWS rifles with TO6 triggers.  Be aware that barrel droop does not affect accuracy or velocity. It's really more of a scope issue than a gun issue. Scopes simply don't have enough clicks of adjustment to compensate for barrel droop at closer airgun ranges. These bases are made to be used with Weaver style mounts such as the Leapers 2 pc. 30mm or 1 Inch Weaver mounts.
  This base has the following features:

  1. Works with RWS rifles with the TO6 trigger
  2. Dual Stop Pins to Prevent Bi-directional Recoil
  3. Four High Strength Screws to Ensure Solid Locking
  4. Converts 9-11mm Scope Rails to Picatinny/Weaver Rail for Most Versatile Accessory Applications
  5. 11 Picatinny Slots on Top Rail to Provide Flexible Eye Relief Adjustment
  6. 5" Overall Length
  7. 10" of Upward Compensation at 30 yards
     

Currently out of stock - Place order now for priority service when new arrives

$18.00
Quantity
Leapers MNT-DN034 1 Piece Riser

Fixed 1 Piece High Picatinny (Top) 11mm (Base) Droop Riser for Breakbarrel Rifles

These mount bases are fixed but provide droop compensation for RWS rifles and other rifles with high levels of droop. Be aware that barrel droop does not affect accuracy or velocity. It's really more of a scope issue than a gun issue. Scopes simply don't have enough clicks of adjustment to compensate for barrel droop at closer airgun ranges. These bases are made to be used with Weaver style mounts such as the Leapers 2 pc. 30mm or 1 Inch Weaver mounts.
There are two bases available. The MNT-DN034 is made to be used with RWS breakbarrel rifles and the MNT-DN460 is made to be used with RWS Sidelever or Underlever rifles. Both bases have the following features:

  1. Tapered Design for Upward Compensation
  2. Recoil Stop Shoulder and Stop Pin to Prevent Bi-directional Recoil
  3. Three High Strength Screws to Ensure Solid Locking
  4. Converts RWS Airgun Rail to Picatinny/Weaver Rail for Most Versatile Accessory Applications
  5. 12 Picatinny Slots on Top Rail to Provide Flexible Eye Relief Adjustment
  6. Reversible Side Plate to Fit 9mm – 11mm Airgun Dovetail with Tight Tolerance
  7. Milled Base to Accept Filler Screw on Rifle
$19.50
Quantity
Leapers RGPM-25H4 2 Piece Mounts

Fixed 2 Piece High 1" 11mm Mounts

These Leapers mounts are designed to be used with all scopes that have a 1 Inch tube body and an objective up to 56 mm. They are great with airguns as they have an integral recoil pin (used to prevent scope slippage) built into the base of one of the mounts, but the pin can be screwed up and out of the way for those who do not need to use this feature. Each ring has 4 screws to hold the scope firmly in place and the base has two heavy duty screws on the side to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.

$19.99
Quantity
Leapers RGPM-25M4 2 Piece Mounts

Fixed 2 Piece Medium 1" (Rings) 11mm (Base) Mounts

These Leapers mounts are designed to be used with all scopes that have a 1 Inch tube body and an objective up to 45 mm. They are great with airguns as they have an integral recoil pin (used to prevent scope creep) built into the base of one of the mounts, but the pin can be screwed up and out of the way for those who do not need to use this feature. Each ring has 4 screws to hold the scope firmly in place and the base has two heavy duty screws on the side to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.

$19.99
Quantity
Leapers RGPM-30H4 2 Piece Mounts

Fixed, 2 Piece High 30mm (Rings) 11mm (Base) Mount

These Leapers mounts are designed to be used with all scopes that have a 30mm tube body and an objective up to 56 mm. They are great with airguns as they have an integral recoil pin (used to prevent scope creep) built into the base of one of the mounts, but the pin can be screwed up and out of the way for those who do not need to use this feature. Each ring has 4 screws to hold the scope firmly in place and the base has two heavy duty screws on the side to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.

$19.99
Quantity
Leapers RGPM-30M4 2 Piece Mounts

Fixed 2 Piece Medium 30mm (Rings) 11mm (Base) Mounts

These Leapers mounts are designed to be used with all scopes that have a 30mm tube body and an objective up to 45 mm. They are great with airguns as they have an integral recoil pin (used to prevent scope creep) built into the base of one of the mounts, but the pin can be screwed up and out of the way for those who do not need to use this feature. Each ring has 4 screws to hold the scope firmly in place and the base has two heavy duty screws on the side to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.

$19.99
Quantity
Leapers RGPM2PA-30H4 1 Piece Mount

Fixed 1 Piece High 30mm (Rings) 11mm (Base) Mount

These 1 piece Leapers mounts are designed to be used with all scopes that have a 30mm scope tube and an objective up to 56 mm. They are great with airguns as they have an integral recoil pin (used to prevent scope creep) built into the base of one of the mounts, but the pin can be screwed up and out of the way for those who do not need to use this feature. Each ring has 4 screws to hold the scope firmly in place and the base has three heavy duty screws on the side to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.

$19.99
Quantity
Leapers RGPM2PA-30M4 1 Piece Mount

Fixed 1 Piece Medium 30mm (Rings) 11mm (Base) Mount

These 1 piece Leapers mounts are designed to be used with all scopes that have a 30mm body tube and an objective up to 45 mm. They are great with airguns as they have an integral recoil pin (used to prevent scope creep) built into the base of one of the mounts, but the pin can be screwed up and out of the way for those who do not need to use this feature. Each ring has 4 screws to hold the scope firmly in place and the base has three heavy duty screws on the side to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.

$19.99
Quantity
Leapers RGPMOFS38-25H4 1 Piece Mount

Fixed 1 Piece High 1" (Rings) 11mm (Base) Mount

These mounts are designed to be used with very long or very short, compact scopes that have a one inch tube body and an objective up to 50 mm. This mount is great with airguns as it has two integral recoil pins which can be used to prevent the mount from sliding. The stop pins are built into the base of the mount and are threaded. They are adjusted from the top using an allen wrench (provided with mount) and either recoil pin can be used. The one that is not needed can simply be screwed up into the mount body. The reason the mount has two stop pins is that the offset can be pointed forward if used with long scopes or backwards if used with short compact scopes and the two stop pins allow one or the other recoil pin to be in position regardless of the offset direction. The four screws on the split rings and two clamping screws on the side give a secure grip when used on guns with even the most punishing recoil.

$21.95
Quantity
Leapers RGWM-25L2 2 Piece Mounts

Fixed 2 Piece Low 1" (Rings) Weaver (Base) Mounts

These Leapers mounts are designed to be used with a Weaver base or in conjunction with the Leapers Drooper mount base and with all scopes that have a 1 Inch tube body.  They are great with airguns as the Weaver base doesn't allow the mounts to slip and slide. Each ring has 4 screws to hold the scope firmly in place when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as other mount available at higher prices.

$12.95
Quantity
Leapers RGWM-25M4 2 Piece Mounts

Fixed 2 Piece Medium 1" Weaver Mount

These Leapers mounts are designed to be used in conjunction with the Leapers Drooper mount base and with all scopes that have a 1 Inch tube body and an objective up to 45 mm. They are great with airguns as the Weaver base doesn't allow the rings to slip and slide. Each ring has 4 screws to hold the scope firmly in place when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as other mount available at higher prices.

$12.95
Quantity
Leapers RGWM-30L4 2 Piece Mounts

Fixed 2 Piece Low 30mm (Rings) Weaver (Base) Mounts

These Leapers mounts are designed to be used in conjunction with the Leapers Drooper mount base and with all scopes that have a 30mm tube body and an objective up to 40 mm. They are great with airguns as the Weaver base doesn't allow the mounts to slip and slide. Each ring has 4 screws to hold the scope firmly in place when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as other mount available at higher prices.

$12.95
Quantity
Leapers RGWM-30M4 2 Piece Mounts

Fixed 2 Piece Medium 30mm (Rings) Weaver (Base) Mounts

These Leapers mounts are designed to be used with all scopes that have a 30mm tube body and an objective up to 45 mm. They are great with airguns as they have an integral recoil pin (used to prevent scope creep) built into the base of one of the mounts, but the pin can be screwed up and out of the way for those who do not need to use this feature. Each ring has 4 screws to hold the scope firmly in place and the base has two heavy duty screws on the side to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.

$12.95
Quantity
Leapers RQ2D1154 2 Piece Quick Release Mounts 1"

Fixed 2 Piece High 1" (Rings) 11mm (Base) Quick Release Mounts

These Leapers mounts are designed to be used with all scopes that have a 1 Inch tube body and an objective up to 55 mm. They are great with airguns as they have an integral recoil pin (used to prevent scope slippage) built into the base of one of the mounts, but the pin is spring loaded and retracts if not needed. Each ring has 4 screws to hold the scope firmly in place and the base features a quick detach lever for attaching to any 11mm rail or dovetail. The tension on the quick detach lever can be adjusted tighter or looser as needed to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.
 

•  4-screw Medium Profile "Tiger" Ring
•  Precision Machined from Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish
•  User Friendly Quick Detach Lever Lock with Full Adjustability to Fit on any 9-11mm Rail
•  Innovative Robust Recoil-proof Spring Tensioned Stop-pin for Rails with or without Recess Holes
•  Spring Tension Controlled Locking Plate with Steel Insert Guarantees Most Secure Installation


 

$24.95
Quantity
Leapers RQ2D1156 2 Piece Quick Release Mounts 1"

Fixed 2 Piece High 1" (Rings) 11mm (Base) Quick Release Mounts

These Leapers mounts are designed to be used with all scopes that have a 1 Inch tube body and an objective up to 55 mm. They are great with airguns as they have an integral recoil pin (used to prevent scope slippage) built into the base of one of the mounts, but the pin is spring loaded and retracts if not needed. Each ring has 4 screws to hold the scope firmly in place and the base features a quick detach lever for attaching to any 11mm rail or dovetail. The tension on the quick detach lever can be adjusted tighter or looser as needed to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.

$24.95
Quantity
Leapers RQ2W3104 2 Piece Quick Release Mounts 30mm Low

Fixed 2 Piece Low 30mm (Rings) Weaver (Base) Quick Release Mounts

These Leapers mounts are designed to be used with all scopes that have a 30mm tube body. They are great with airguns that have Picatinny or Weaver scope rails.  Each ring has 4 screws to hold the scope firmly in place and the base features a quick detach lever for attaching to any Picatinny or Weaver rail or dovetail. The tension on the quick detach lever can be adjusted tighter or looser as needed to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.
 

•  4-screw Low Profile Ring
•  Precision Machined from Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish
•  User Friendly Quick Detach Lever Lock with Full Adjustability to fit on any Picatinny or Weaver Rail
•  Innovative Robust Recoil-proof Spring Tensioned Stop-pin for Rails with or without Recess Holes
•  Spring Tension Controlled Locking Plate with Steel Insert Guarantees Most Secure Installation


 

$24.95
$34.95 (save 29 %)
Quantity
UTG RQ2W3154 2 Piece Quick Release Mounts 30mm Medium

Fixed 2 Piece Medium 30mm (Rings) Weaver (Base) Quick Release Mounts

These UTG mounts are designed to be used with all scopes that have a 30mm tube body. They are great with airguns that have Picatinny or Weaver scope rails.  Each ring has 4 screws to hold the scope firmly in place and the base features a quick detach lever for attaching to any Picatinny or Weaver rail or dovetail. The tension on the quick detach lever can be adjusted tighter or looser as needed to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.
 

•  4-screw Medium Profile Ring
•  Precision Machined from Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish
•  User Friendly Quick Detach Lever Lock with Full Adjustability to fit on any Picatinny or Weaver Rail
•  Innovative Robust Recoil-proof Spring Tensioned Stop-pin for Rails with or without Recess Holes
•  Spring Tension Controlled Locking Plate with Steel Insert Guarantees Most Secure Installation


 

$24.95
$34.95 (save 29 %)
Quantity