Home :: PCP Supplies

PCP Supplies

Air Force Talon P and Escape Spin Loc Spare Tank

Talon P and Escape Spare Spin Loc Air Bottle
 

Spin Loc Air bottle for the Air Force Talon P pistol and Escape rifle.
 

$165.95
$174.95 (save 5 %)
Quantity
AirForce DINN Adapter

Use with: Talon, TalonSS, Condor and CondorSS

High pressure scuba tanks and carbon fiber air tanks have become common methods for filling PCP air guns. Air Force has created a special DINN fitting for use with these tanks. The Air Force DINN adapter will fit the standard DINN port on your air tank. The adapter is designed specifically for use with the AirForce Talon SS and Condor PCP airguns but will work with all airguns. The adapter is fitted with a hose, gauge and bleeder valve. The hose is fitted with a quick release female fitting for use with many different guns..

$91.95
$96.95 (save 5 %)
Quantity
AirForce Hand Pump

Use for: Charging AirForce Rifles and other PCP's (any brand)

Advanced multi-stage design ensures the pump is highly efficient, requiring minimum of effort to charge a rifle. The AirForce pump features an easy to read gauge and distinctive and practical right angled feed to ensure continuous air flow. The AirForce hand pump is a serious tool for charging Pre-Charged Pneumatic (PCP) air rifles and pistols. It easily fills PCP rifles to 3000 psi.
The AirForce version comes with an adapter specifically for use with Air Force Air Bottles as shown in the picture above. No hose or other adapters are required for use with AirForce rifles. This lightweight hand pump may be easily carried on field trips where transporting scuba tanks would be difficult.

$212.95
$218.00 (save 2 %)
Quantity
AirForce Hand Pump Adapter

Use with: All AirForce PCP Rifles

This item is used with handpumps to charge the Talon or Condor rifle bottles. The thread size is 1/8" BSPP.

$23.95
Quantity
AirForce Handpump Adapter with Nipple

Use with: All AirForce PCP Rifles

This version of the AirForce handpump adapter is made to work with the newest AirForce handpump which now features a hose with a female quick fill on the end. The new handpump adapter will plug right into the female quick fill on the end of the hose making it very easy to use.

$23.95
Quantity
AirForce Scuba Adapter

Use with: Talon, TalonSS, Condor and CondorSS

Scuba tanks provide one of the most common methods for filling your PCP airgun. This adapter is designed specifically for use with the AirForce Talon SS and Condor PCP airguns. Hand-tighten the adapter to the top of your scuba tank, screw your Talon air bottle into the scuba adapter and begin charging.

$71.95
$73.95 (save 3 %)
Quantity
Benjamin Sheridan Hand Pump

Charging, Hand Pump for Pre-Charged airguns


Advanced multi-stage design ensures the pump is highly efficient, requiring minimum of effort to charge a rifle. The Benjamin pump features an easy to read gauge and distinctive and practical right angled feed to ensure continuous air flow.

The Benjamin hand pump is a serious tool for charging Pre-Charged Pneumatic (PCP) air rifles and pistols. It easily fills PCP rifles to 3000 psi.
.
The hand pump comes with an 12" High Pressure hose which is equipped with a female quick connect adapter already installed.   Optional special adapters may be purchased to accommodate guns such as the Air Force Talon SS/Condor, Career 707, Beeman P70, P40 and Eun Jin airguns. The hand pump also features a large built-in gauge that allows easy reading during the charging operation.

This lightweight hand pump may be easily carried on field trips where transporting scuba tanks would be difficult.

$195.00
$255.00 (save 24 %)
Quantity
Benjamin Sheridan Marauder Scuba Adapter

Charging, Scuba adapter for Pre-Charged airguns

Scuba tanks provide one of the most common methods for filling your PCP airgun. This unit is made specfically for the Benjamin Sheridan Marauder but will work for any pcp with the correct fill adapter. The female quick fill that is needed to connect to the Marauder's air tank comes with the scuba adapter and is already connected to the end of the hose.

$125.00
Quantity
Carbon Fiber Tank

Charging, Carbon Fiber Tank (88 cu.ft.) for Pre-Charged airguns

The carbon fiber tank has a volume of 88 cu. ft. and will provide a PCP shooter with a lot of fills before needing recharging. It's a must for any anybody that does a lot of shooting. The 15 lb. weight is considerably less than an aluminum scuba tank which is roughly 35 lbs and it holds up to 4500 psi as opposed to a scuba tank's 3000 psi. And that means a lot more fills to your gun's air tank. We use one here at the Straight Shooters shop and wouldn't go without one.  We include the 3 foot hose for convenient filling.

$645.00
$699.00 (save 8 %)
Quantity
Carbon Fiber Tank Carry Strap

Use With: Carbon Fiber and Scuba Tanks

Make carrying your carbon fiber or scuba tank easier with this tough carry strap.  Perfect for tanks of any size the straps can adjust to accommodate any size tank.

$25.00
$29.00 (save 14 %)
Quantity
Carbon Fiber Tank Feet

Use With: Carbon Fiber and Scuba Tanks

A set of two "feet" to cradle your carbon fiber tank.  Slip these feet on your tank to keep it from rolling. This product is made to fit the 88 cu. ft carbon fiber tank. It is not made to fit smaller carbon fiber tanks.
 

 

$33.00
$38.00 (save 13 %)
Quantity
Carbon Firestation Adapter

Adapter, Firestation adapter for Pre-Charged airguns

 

If you own a Carbon Fiber Tank or are considering buying one, then you will need to be aware that one of the sites that can charge the tank to 4500 psi is a Firestation. Or sometimes a store that sells fire equipment. And very often they will need the adapter shown above to be able to connect to and charge your Carbon Fiber tank. So if you have determined that you will be getting your tank charged at a firestation or fire equipment store, then you will wish to remember to purchase the firestation adapter pictured above.

 

$61.00
Quantity
FX .22 Stackable Moderator

FX Wildcat .22 Stackable Moderator


Add this six section moderator to your Wildcat to reduce the report making your air rifle back yard friendly.
Note this moderator is made for and fits only the FX Wildcat.

$150.00
Quantity
FX .25 Stackable Moderator

FX Wildcat .25 Stackable Moderator


Add this six section moderator to your Wildcat to reduce the report making your air rifle back yard friendly.
Note this moderator is made for and fits only the FX Wildcat.

$150.00
Quantity
FX .30 Stackable Moderator

FX Bobcat, Indy.30 Stackable Moderator


Add this six section moderator to your Bobcat or Indy to reduce the report making your air rifle back yard friendly.
Note this moderator is made for and fits only the FX Bobcat and Indy models.

$150.00
Quantity
FX 148cc Air Cylinder

Charging, Air cylinder (148cc) for FX airguns


The standard size air cylinders on some FX air rifles is 148cc. However, if more shots are needed, the air cylinder can be replaced with the longer 181cc tank. The air cylinders do not apply to all FX rifles so check it out with us before ordering if you aren't sure.

$125.00
Quantity
FX-22-Stack-Moderator-Baffle

FX Wildcat .22 Stackable Moderator Baffle Component


The FX Wildcat .22 ships without the base section or end cap section of the moderator so you may need those sections as well as the baffle sections. You need to add the middle components (baffles) to your .22 caliber Wildcat to reduce the report making your air rifle back yard friendly. The standard moderator contains four (4) of these components.

Note this moderator is made for and fits only the FX Wildcat.

$25.00
Quantity
FX-22-Stack-Moderator-Section-1

FX Wildcat .22 Stackable Moderator Section 1


The FX Wildcat .22 ships without the base section (section 1) or end cap (section 6) of the moderator. If you are installing a new moderator by sections you will need to have section 1 the base section. To this you can add the baffle sections and finally the end cap (section 6). To reduce the report making your air rifle back yard friendly you need to add the middle components (baffles) to your .22 caliber Wildcat and the end cap (section 6).
Note this moderator is made for and fits only the FX Wildcat.

$25.00
Quantity
FX-22-Stack-Moderator-Section-6

FX Wildcat .22 Stackable Moderator Section 6


The FX Wildcat .22 ships without the base section (section 1) or end cap (section 6) of the moderator. If you are installing a new moderator by sections you will need to have section 1 the base section. To this you can add the baffle sections and finally the end cap (section 6). To reduce the report making your air rifle back yard friendly you need to add the middle components (baffles) to your .22 caliber Wildcat and the end cap (section 6).
Note this moderator is made for and fits only the FX Wildcat.

$25.00
Quantity
FX-25-Stack-Moderator-Baffle

FX Wildcat .25 Stackable Moderator Baffle Component


The FX Wildcat .25 ships with the base section and end cap section of the moderator. You only need to add the middle components (baffles) to your .25 caliber Wildcat to reduce the report making your air rifle back yard friendly. The standard moderator contains four (4) of these components.

Note this moderator is made for and fits only the FX Wildcat.

$25.00
Quantity
FX-25-Stack-Moderator-Section-1

FX Wildcat .25 Stackable Moderator Section 1


The FX Wildcat .25 ships with the base section (section 1) and the end cap (section 6) of the moderator. You only need this section if you need a replacement for your original base sectiion 1. To reduce the report making your air rifle back yard friendly you need to add the middle components (baffles) to your .25 caliber Wildcat.
Note this moderator is made for and fits only the FX Wildcat.

$25.00
Quantity
FX-25-Stack-Moderator-Section-6

FX Wildcat .25 Stackable Moderator Section 6


The FX Wildcat .25 ships with the base section (section 1) and the end cap (section 6) of the moderator. You only need this section if you need a replacement for your original End Cap section 6. To reduce the report making your air rifle back yard friendly you need to add the middle components (baffles) to your .25 caliber Wildcat.
Note this moderator is made for and fits only the FX Wildcat.

$25.00
Quantity
FX-30-Stack-Moderator-Baffle

FX .30 Stackable Moderator Baffle Component


The FX .30 fits other FX rifles as there is no .30 Wildcat at this time.

$25.00
Quantity
Hill Dry Pack Refill

Maintenance, Dry Pack Refill beads for Hill handpumps

It's a good idea to replace the dessicant beads in your Hill Dry Pack every year or two. This inexpensive, handy pack of replacement beads makes it quick and easy to do. Pick up a pack or two and keep them on the shelf. It's nice to have them handy when you're ready to do the replacement.

$15.00
Quantity
Hill Hand Pump-Gen 4

Charging, Hill handpump w/Dry Pack for Pre-Charged airguns

The Hill Pump  is rigorously tested and backed by a twelve month warranty. Hill Pumps have been pump manufacturers since 1841 and have a distinguished pedigree in the air pump field.

The Hill pump comes standard with a 3500-psi gauge, precision-machined pressure chamber with brass fittings, heavy-duty connector hose, universal adapter and a replaceable Micron Filter. The Micron Filter is a unique replaceable filter system that minimizes potential contamination of your air rifle or pistol.

The standard pump hose and connector (1/8" BSP) works with all airguns with the standard PCP adapters.

The heavy duty construction and built-in replaceable filter is what sets the Hill pump apart. The replaceable filter can be changed periodically. We recommend an annual replacement cycle. Keeping the filter current can help maintain a clean airflow into your air rifle. We consider the filter to be a very nice feature of this pump.
Now included with each pump is the Dry Pack. The Dry Pack is a highly efficient moisture filter for use on your hill pump.

MK4 Hill Pump with Dry Pack - Maximum Capability 3500psi

New! MK4 Air Rifle Pump

  • Even easier to pump
  • Highest volume output
  • Field strip in less than 5 minutes
  • Patented pump and dry air system
  • Removes 90% of moisture from air
  • Longer outlet hose

1 Year Limited Warranty due factory defects. Pump comes with hose with 1/8" bsp connection. Some air guns may require additional adaptors. .

 

$289.00
Quantity
Hill Maintenance Kit

Maintenance, Use with Hill Handpumps (Generation II or earlier)

Here is a maintenance kit for the Hill Handpump. It's meant for the shooter that wants to take his handpump apart and replace the ORings and relube the entire pump. The Hill Maintenance Kit contains all the necessary ORings, Spring, Replacement Valve and Filter to do the job. The lube (Silicone Lube) can be purchased separately.

Use the Maintenance kit for pumps made prior to May 1 2011
Use the Gen3 maintenance kit for the newer pumps with the tripple rings engraved in the top and bottom of the pump shaft.

$35.00
Quantity
Hill Maintenance Kit MKII Gen 3

Maintenance, Use with current Hill Handpumps (Generation III)

Here is a maintenance kit for the Hill Handpump. It's meant for the shooter that wants to take his handpump apart and replace the ORings and relube the entire pump. The Hill Maintenance Kit contains all the necessary ORings, Spring, Replacement Valve and Filter to do the job. The lube (Silicone Lube) can be purchased separately.

Use the MKII Maintenance kit for pumps made prior to May 1 2011
Use the Gen3 maintenance kit for the newer pumps with the tripple rings engraved in the top and bottom of the pump shaft.

$35.00
Quantity
HW100 Fill Probe

HW100 Fill Probe

Fill probe for the Weihrauch HW100

$24.95
Quantity
Omega Super Charger Compressor

Omega Super Charger Compressor


The Omega Super Charger air compressor is the benchmark in affordable filling of air cylinders and airguns. This small, compact, portable unit sports features normally reserved for compressors with double the price tag.

The automatic shut off is easily set by the twin indicator arms in the extra large easy to read pressure gauge. When the desired pressure is reached the compressor shuts itself off automatically. In addition an auto bleed system is also programmable to any duration and interval that air quality and humidity may require.

With these user friendly features one can attach their air cylinder or airgun push the on button and go eat dinner or watch television. The compressor will bleed off all moisture and shut down when filling is complete. No other unit can match the Super Charger for ease of use and protection of equipment from corrosive moisture as well as quiet operation. 

An hour meter is also included to alert the user of regular service intervals. The Super Charger is encased in a carbon fiber finished, all-metal case that protects the compressor from the elements as well as adds a touch of elegance to the appearance. Included is a carry handle for portability, a tool kit with spare parts and lubricants, a fabric cover for further protection when not in use, a three foot long filling hose and a female quick disconnect. A one year parts and labor warranty is supplied by Raptor Pneumatics.

$1879.00
Quantity
Paintball Adapter for Carbon Fiber Tank

Adapter, Paintball adapter for Pre-Charged airguns

Carbon Fiber tanks provide one of the best methods for filling your PCP airgun. But sometimes it can be hard to find a scuba shop in your area that can fill the Carbon Fiber tank to 4500 psi. If you don't have a scuba shop in your area that can charge to 4500 psi, check out paintball shops. Many paintball shops can fill tanks to 4500 psi and to do so they will need this adapter. Just take this into the shop with you when recharging is needed. Just unscrew the standard hose for charging your gun and screw in this paintball adapter. After the tank is recharged just unscrew the paintball adapter and screw in the hose for charging your gun and you're all set to go. It really is quick and simple and does not require tools.

$38.00
Quantity
Quick Fill Adapter - Female, Standard

Adapter, Quick Fill, Female


Switch from one gun to another with no tools.
If you own more than one PCP you know what a hassle it is to change from one charging adapter to another. The Quick Connect system allows a shooter to switch from charging one gun to another without scrambling for a wrench. The Quick Connecton system consists of two primary pieces. The Foster female connector and the male connector. The female connector attaches directly onto your compressor, handpump or scuba adapter hose. The male connector screws onto the gun's probe, collar, special adapter or other filler device. The male and female connectors are then easily connected and disconnected.
 

$25.00
Quantity
Quick Fill Adapter-Male

Adapter, Quick Fill Male, Standard Size

If you own more than one PCP you know what a hassle it is to change from one charging adapter to another. The Quick Fill system allows a shooter to switch from charging one gun to another without scrambling for a wrench. The Quick Connection system consists of two primary pieces. The uick Fill Female connector and the Quick Fill Male connector. The Female connector attaches directly onto your compressor, hand pump or scuba adapter. The Male connector screws onto the gun's probe, collar, special adapter or other filler device. The Male and Female connectors are then easily connected and disconnected.

$25.00
Quantity
Scuba Charging Adapter

Adapter, Scuba adapter for Pre-Charged airguns

Scuba tanks provide one of the most common methods for filling your PCP airgun. This unit is not specific to any single gun model but rather can be used with most PCP rifle. Some rifles though will require an optional quick fill adapter. Typically these are guns with air bottles or those that have probes with Korean threads. Guns from Logun, Air Arms, FX and Falcon do not require an additional adapter. To use, simply tighten the adapter to the top of your 80 cu. ft. scuba tank, attach the probe provided with the gun and you're ready to fill. Easily upgraded to the system if you own multiple PCP rifles or have a gun that utilizes a removable air bottle or a gun with a probe that has Korean threads

$125.00
Quantity
Swingline Fill System

Use with: All Air Guns with Quick Connect Male Fitting

Allows the user to orient the valve clamp, pressure gauge and fill line independently. It allows the scuba cylinder to be positioned vertically or horizontally and still enables easy access to the fill line or to view the pressure gauge. After filling the fill line can be rotated close to the scuba cylinder for storage or transport.

 

This adapter is equiped with a quick connect female adapter factory installed on the end of the hose.

 

$132.95
$134.95 (save 1 %)
Quantity
Theoben 500cc Bottle

Charging, 500cc Air Bottle for Rapid Pre-Charged airguns

This 500cc bottle is the "upgrade" or optional size air cylinder on a Theoben Rapid 12. It's large size yields more shots per fill than the air cylinders on many other PCP rifles. Most Theoben Rapids have a standard size 400cc bottle but it may be upgraded to the 500cc bottle for $25 on a new rifle purchase from this dealer. If the 500cc bottle is purchased later, the price is $178.95 as shown on this page. The $25 upgrade price applies ONLY at the time the Rapid is purchased new and from this dealer.
 

$178.95
Quantity
Theoben Rapid Bottle Charging Adapter

Adapter, Charging adapter for Rapid Pre-Charged airguns

This item is used for charging Theboen Rapid 400cc and 500cc air bottles. The adapter is threaded to fit any handpump, scuba adapter or carbon fiber tank hose. A Quick Fill Male can also be screwed on to allow for use with hoses that have a female quick fill.

$30.00
$40.00 (save 25 %)
Quantity

Bestsellers

Quick Fill Adapter-Male

Adapter, Quick Fill Male, Standard Size

If you own more than one PCP you know what a hassle it is to change from one charging adapter to another. The Quick Fill system allows a shooter to switch from charging one gun to another without scrambling for a wrench. The Quick Connection system consists of two primary pieces. The uick Fill Female connector and the Quick Fill Male connector. The Female connector attaches directly onto your compressor, hand pump or scuba adapter. The Male connector screws onto the gun's probe, collar, special adapter or other filler device. The Male and Female connectors are then easily connected and disconnected.

$25.00
Quantity
Hill Hand Pump-Gen 4

Charging, Hill handpump w/Dry Pack for Pre-Charged airguns

The Hill Pump  is rigorously tested and backed by a twelve month warranty. Hill Pumps have been pump manufacturers since 1841 and have a distinguished pedigree in the air pump field.

The Hill pump comes standard with a 3500-psi gauge, precision-machined pressure chamber with brass fittings, heavy-duty connector hose, universal adapter and a replaceable Micron Filter. The Micron Filter is a unique replaceable filter system that minimizes potential contamination of your air rifle or pistol.

The standard pump hose and connector (1/8" BSP) works with all airguns with the standard PCP adapters.

The heavy duty construction and built-in replaceable filter is what sets the Hill pump apart. The replaceable filter can be changed periodically. We recommend an annual replacement cycle. Keeping the filter current can help maintain a clean airflow into your air rifle. We consider the filter to be a very nice feature of this pump.
Now included with each pump is the Dry Pack. The Dry Pack is a highly efficient moisture filter for use on your hill pump.

MK4 Hill Pump with Dry Pack - Maximum Capability 3500psi

New! MK4 Air Rifle Pump

  • Even easier to pump
  • Highest volume output
  • Field strip in less than 5 minutes
  • Patented pump and dry air system
  • Removes 90% of moisture from air
  • Longer outlet hose

1 Year Limited Warranty due factory defects. Pump comes with hose with 1/8" bsp connection. Some air guns may require additional adaptors. .

 

$289.00
Quantity
Carbon Fiber Tank Feet

Use With: Carbon Fiber and Scuba Tanks

A set of two "feet" to cradle your carbon fiber tank.  Slip these feet on your tank to keep it from rolling. This product is made to fit the 88 cu. ft carbon fiber tank. It is not made to fit smaller carbon fiber tanks.
 

 

$33.00
$38.00 (save 13 %)
Quantity
Carbon Fiber Tank Carry Strap

Use With: Carbon Fiber and Scuba Tanks

Make carrying your carbon fiber or scuba tank easier with this tough carry strap.  Perfect for tanks of any size the straps can adjust to accommodate any size tank.

$25.00
$29.00 (save 14 %)
Quantity
FX .22 Stackable Moderator

FX Wildcat .22 Stackable Moderator


Add this six section moderator to your Wildcat to reduce the report making your air rifle back yard friendly.
Note this moderator is made for and fits only the FX Wildcat.

$150.00
Quantity
FX-30-Stack-Moderator-Baffle

FX .30 Stackable Moderator Baffle Component


The FX .30 fits other FX rifles as there is no .30 Wildcat at this time.

$25.00
Quantity
FX-25-Stack-Moderator-Baffle

FX Wildcat .25 Stackable Moderator Baffle Component


The FX Wildcat .25 ships with the base section and end cap section of the moderator. You only need to add the middle components (baffles) to your .25 caliber Wildcat to reduce the report making your air rifle back yard friendly. The standard moderator contains four (4) of these components.

Note this moderator is made for and fits only the FX Wildcat.

$25.00
Quantity