Home :: Mounts/Risers 1 Piece

Mounts/Risers 1 Piece


Fixed 1 Piece 1" Mounts
5 products

Fixed 1 Piece 30mm Mounts
3 products

Fixed 1 Piece Drooper Mounts
4 products

Fixed 1 Piece Offset Mounts
5 products

Fixed 1 Piece Risers
6 products

Adjustable 1 Piece 1" Mounts
7 products

Adjustable 1 Piece 30mm Mounts

1 Piece 11mm Rapid Scope Rail

1 Piece 11mm Rapid Scope Rail

This scope rail converts the standard Theoben Rapid scope mounts to a 1 Piece 11mm scope rail.

$45.00
Quantity
Beeman 5036 1 Piece Mount

Fixed 1 Piece High 1" (Rings) 11mm (Base) Mount

For the shooter who wants a scope mount with absolute maximum clamping ability and the extra height for the larger scopes, this is it! The one-piece construction affords the greatest area of grip, and the four screws along the side give even clamping pressure for a sure hold.. Made from the finest materials, the mount has an attractive matte finish. For use with all one inch scope tubes and objectives up to 56mm.

$67.00
Quantity
Beeman 5039 1 Piece Mount

Adjustable 1 Piece High 1 Inch (Rings) 11mm (Base) Mount

This one piece double screw mount is adjustable for windage and elevation. It's suitable for all spring guns or semi auto rimfire rifles as well as some pre-charged pneumatic air rifles.  The maximum amount of adjustment is 2mm from one end of the mount to the other.  This applies to the windage and elevation and  60mm diameter objective lens will clear on most rifles.  Removable arrestor pin included.

Also sold as the Sportmatch APO55 1 piece adjustable mount.

$65.00
Quantity
Beeman 5040 1 Piece Mount

Fixed 1 Piece Medium 1" (Rings) 11mm (Base) Mount

For the shooter who wants a scope mount with absolute maximum clamping ability, this is it! The one-piece construction affords the greatest area of grip, and the four screws along the side give even clamping pressure for a sure hold. The recoil pin is invaluable for use on the piston airguns to prevent scope creep, yet is easily removable for use on any other model of gun. Made from the finest materials, the mount has an attractive matte finish. For use with all one inch scopes with objectives up to 45mm.

$59.00
Quantity
BKL-168 1 Piece Riser

Fixed 1 Piece High 11mm (Base) to 11mm (Top) Riser

The BKL 168 is a 1 piece 11mm to 11mm riser designed to give extra height for the gun's mount whenever extra height is wanted or needed. These risers, being 4" long, fit under 1 piece mounts and are especially useful when using scopes with large 60mm objectives.

$42.75
$45.00 (save 5 %)
Quantity
BKL-254 1 Piece Mount

Fixed 1 Piece Medium 1" (Rings) 11mm (Base) Offset Mount

BKL offers the 254 1 piece, cantilevered scope mounts in 3 configurations. Choose between the fixed medium, high or drooper version. The offset (cantilevered) mounts are excellent for use with very short scopes. Very often short scopes cannot be pulled back far enough to allow for proper eye relief. Using an offset (cantilevered) mount allow the scope to be mounted farther back than is possible with a standard mount.
These mounts are sturdy, dependable and have great holding power.
The 254 is a medium high fixed mount to be used with scopes tobjectives up to 45mm
The 254H is a high fixed mount to be used with scopes objectives up to 56mm
The 254D7 is a high mount with .007" droop compensation built in and can be used with scopes objectives up to 56mm

$38.00
Quantity
BKL-254D7 1 Piece Mount

Fixed 1 Piece High 1" (Rings) 11mm (Base) Offset Mount

BKL offers the 254 1 piece, cantilevered scope mounts in 3 configurations. Choose between the fixed medium, high or drooper version. The offset (cantilevered) mounts are excellent for use with very short scopes. Very often short scopes cannot be pulled back far enough to allow for proper eye relief. Using an offset (cantilevered) mount allow the scope to be mounted farther back than is possible with a standard mount.
These mounts are sturdy, dependable and have great holding power.
The 254 is a medium high fixed mount to be used with scopes tobjectives up to 45mm
The 254H is a high fixed mount to be used with scopes objectives up to 56mm
The 254D7 is a high mount with .007" droop compensation built in and can be used with scopes objectives up to 56mm

$47.50
$50.00 (save 5 %)
Quantity
BKL-254H 1 Piece Mount

Fixed 1 Piece High 1" (Rings) 11mm (Base) Offset Mount

BKL offers the 254 1 piece, cantilevered scope mounts in 3 configurations. Choose between the fixed medium, high or drooper version. The offset (cantilevered) mounts are excellent for use with very short scopes. Very often short scopes cannot be pulled back far enough to allow for proper eye relief. Using an offset (cantilevered) mount allow the scope to be mounted farther back than is possible with a standard mount.
These mounts are sturdy, dependable and have great holding power.
The 254 is a medium high fixed mount to be used with scopes tobjectives up to 45mm
The 254H is a high fixed mount to be used with scopes objectives up to 56mm
The 254D7 is a high mount with .007" droop compensation built in and can be used with scopes objectives up to 56mm

$45.00
Quantity
BKL-260 1 Piece Mount

Fixed 1 Piece 1" (Rings) 11mm (Base) Mount

When it comes to holding power there is no better mount on the market than the BKL-260.  Put this, one piece six screw scope mount on any magnum airgun, elephant gun or sherman tank and forget about it, this mount is not going anywhere. 

BKL offers the 260, 1 piece scope mounts in 3 configurations. Choose between the medium, high or drooper version. These mounts all have 6 side screws to solidly fasten the mount onto the dovetail or scope rail. These mounts are ultra sturdy, dependable and have great holding power. Once tightened onto a dovetail or scope rail, they simply don't move.  Combine the griping power with the self centering mounting system and they do not come any better than the BKL line of mounts

The 260 is a medium high fixed mount to be used with scopes objectives up to 45mm
The 260H is a high fixed mount to be used with scopes objectives up to 56mm
The 260D7 is a high mount with .007" droop compensation built in and can be used with scopes objectives up to 56mm

General Features

  • Overall length: 4"
  • Clamp length: 4"
  • Ring width: 0.6"
  • Base of mount to bottom of scope tube: 0.774"
  • Turret clearance: 0.125"
  • Weight: 5.1 oz.
$52.25
$55.00 (save 5 %)
Quantity
BKL-260H 1 Piece Mount

Fixed 1 Piece High 1" (Rings) 11mm (Base) Mount

General Features

  • Overall length: 4"
  • Clamp length: 4"
  • Ring width: 0.6"
  • Base of mount to bottom of scope tube: 0.974"
  • Turret clearance: 0.125"
  • Weight: 5.1 oz.

When it comes to holding power there is no better mount on the market than the BKL-260.  Put this, one piece six screw scope mount on any magnum airgun, elephant gun or sherman tank and forget about it, this mount is not going anywhere. 

BKL offers the 260, 1 piece scope mounts in 3 configurations. Choose between the medium, high or drooper version. These mounts all have 6 side screws to solidly fasten the mount onto the dovetail or scope rail. These mounts are ultra sturdy, dependable and have great holding power. Once tightened onto a dovetail or scope rail, they simply don't move.  Combine the griping power with the self centering mounting system and they do not come any better than the BKL line of mounts

The 260 is a medium high fixed mount to be used with scopes objectives up to 45mm
The 260H is a high fixed mount to be used with scopes objectives up to 56mm
The 260D7 is a high mount with .007" droop compensation built in and can be used with scopes objectives up to 56mm

The BKL 260H is .2" Taller than standard height BKL-260

$52.25
$55.00 (save 5 %)
Quantity
BKL-354 1 Piece Mount

Fixed 1 Piece Medium 30mm (Rings) 11mm (Base) Offset Mount

The BKL 354 1 piece, 30mm cantilevered (offset) scope mounts is excellent for use with very short scopes. Very often short scopes cannot be pulled back far enough to allow for proper eye relief. Using an offset (cantilevered) mount allows the scope to be mounted farther back than is possible with a standard mount.

These mounts are sturdy, dependable and have great holding power.   The 354 is a medium high fixed mount to be used with scopes tobjectives up to 45mm

$57.00
$60.00 (save 5 %)
Quantity
BKL-360 1 Piece Mount

Fixed 1 Piece Medium 30mm (Rings) 11mm (Base) Mount

General Features

  • Overall length: 4"
  • Clamp length: 4"
  • Ring width: 0.6"
  • Turret clearance: 0.125"
  • Weight: 5.1 oz.

When it comes to holding power there is no better mount on the market than the BKL-260.   The BKL-360 is the same mount in a 30mm scope tube configuration.  Put this, one piece six screw scope mount on any magnum airgun, elephant gun or sherman tank and forget about it, this mount is not going anywhere. 

BKL offers the 360, as a medium high scope mount.with 6 side screws to solidly fasten the mount onto the dovetail or scope rail. These mounts are ultra sturdy, dependable and have great holding power. Once tightened onto a dovetail or scope rail, they simply don't move.  Combine the griping power with the self centering mounting system and they do not come any better than the BKL line of mounts

$57.00
$60.00 (save 5 %)
Quantity
BKL-460 1 Piece Mount

Fixed 1 Piece Medium 1" (Rings) 14mm (Base) Mount

When it comes to holding power there is no better mount on the market than the BKL-260.  Put this, one piece six screw scope mount on any magnum airgun, elephant gun or sherman tank and forget about it, this mount is not going anywhere. 

The 460 14mm mount was designed to work with the air pistols and air rifles that have 14mm dovetails or scope rails rather than the standard 11mm. The mount has 6 side screws to solidly fasten onto the dovetail or scope rail and is ultra sturdy, dependable and has great holding power. Once tightened onto a dovetail or scope rail, it simply doesn't move.
The 460 is a medium high 14mm fixed mount with 1 Inch rings and is meant to be used airgun scopes with objectives up to 45mm


General Features

  • Overall length: 4"
  • Clamp length: 4"
  • Ring width: 0.6"
  • Base of mount to bottom of scope tube: 0.774"
  • Turret clearance: 0.125"
  • Weight: 5.1 oz.
$54.50
$56.50 (save 4 %)
Quantity
BKL-568 1 Piece Riser

Fixed 1 Piece High 3/8" (Base) to Weaver (Top) Riser

General Features

  • Riser height: Adds 0.69"
  • Overall length: 4"
  • Clamp length: 4"
  • Weight: 3.1 oz.


The BKL 568 is a 1 piece 11mm to Weaver riser meant to give extra height for the gun's mount whenever extra height is wanted or needed. These risers, being 4" long, fit under 1 pc. mounts and are especially useful when using scopes with large 60mm objectives.

$42.75
$45.00 (save 5 %)
Quantity
BSquare 17021 1 Piece Adjustable Riser

Adjustable 1 Piece Medium Weaver (Top) 11mm (Base) Adjustable Riser

This is an adjustable 1 piece adapter/riser with an 11mm base and a Weaver top for use with most rifles. It's purpose is to allow the use of  Weaver mounts. One end can be raised to counter any barrel droop if needed.

$39.95
Quantity
BSquare 17076 1 Piece Riser

Fixed 1 Piece Medium Weaver (Top) Slotted (Base) RWS C-225 Pistol Adapter

 
Designed for use with the RWS C-225, Walther, Baretta CO2 pistols
Accepts standard Weaver scope mounts
Allows easy access for changing rotary magazines
$22.00
Quantity
Leapers DNT06 1 Piece Droop Riser for RWS TO6 Triggers

Fixed 1 Piece High Picatinny (Top) 11mm (Base) Droop Riser for RWS Rifles with TO6 Triggers

This mount base is fixed but provides droop compensation for RWS rifles with TO6 triggers.  Be aware that barrel droop does not affect accuracy or velocity. It's really more of a scope issue than a gun issue. Scopes simply don't have enough clicks of adjustment to compensate for barrel droop at closer airgun ranges. These bases are made to be used with Weaver style mounts such as the Leapers 2 pc. 30mm or 1 Inch Weaver mounts.
  This base has the following features:

  1. Works with RWS rifles with the TO6 trigger
  2. Dual Stop Pins to Prevent Bi-directional Recoil
  3. Four High Strength Screws to Ensure Solid Locking
  4. Converts 9-11mm Scope Rails to Picatinny/Weaver Rail for Most Versatile Accessory Applications
  5. 11 Picatinny Slots on Top Rail to Provide Flexible Eye Relief Adjustment
  6. 5" Overall Length
  7. 10" of Upward Compensation at 30 yards
     
$18.00
Quantity
Leapers MNT-DN034 1 Piece Riser

Fixed 1 Piece High Picatinny (Top) 11mm (Base) Droop Riser for Breakbarrel Rifles

These mount bases are fixed but provide droop compensation for RWS rifles and other rifles with high levels of droop. Be aware that barrel droop does not affect accuracy or velocity. It's really more of a scope issue than a gun issue. Scopes simply don't have enough clicks of adjustment to compensate for barrel droop at closer airgun ranges. These bases are made to be used with Weaver style mounts such as the Leapers 2 pc. 30mm or 1 Inch Weaver mounts.
There are two bases available. The MNT-DN034 is made to be used with RWS breakbarrel rifles and the MNT-DN460 is made to be used with RWS Sidelever or Underlever rifles. Both bases have the following features:

  1. Tapered Design for Upward Compensation
  2. Recoil Stop Shoulder and Stop Pin to Prevent Bi-directional Recoil
  3. Three High Strength Screws to Ensure Solid Locking
  4. Converts RWS Airgun Rail to Picatinny/Weaver Rail for Most Versatile Accessory Applications
  5. 12 Picatinny Slots on Top Rail to Provide Flexible Eye Relief Adjustment
  6. Reversible Side Plate to Fit 9mm – 11mm Airgun Dovetail with Tight Tolerance
  7. Milled Base to Accept Filler Screw on Rifle
$19.50
Quantity
Leapers RGPM2PA-30H4 1 Piece Mount

Fixed 1 Piece High 30mm (Rings) 11mm (Base) Mount

These 1 piece Leapers mounts are designed to be used with all scopes that have a 30mm scope tube and an objective up to 56 mm. They are great with airguns as they have an integral recoil pin (used to prevent scope creep) built into the base of one of the mounts, but the pin can be screwed up and out of the way for those who do not need to use this feature. Each ring has 4 screws to hold the scope firmly in place and the base has three heavy duty screws on the side to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.

$19.99
Quantity
Leapers RGPM2PA-30M4 1 Piece Mount

Fixed 1 Piece Medium 30mm (Rings) 11mm (Base) Mount

These 1 piece Leapers mounts are designed to be used with all scopes that have a 30mm body tube and an objective up to 45 mm. They are great with airguns as they have an integral recoil pin (used to prevent scope creep) built into the base of one of the mounts, but the pin can be screwed up and out of the way for those who do not need to use this feature. Each ring has 4 screws to hold the scope firmly in place and the base has three heavy duty screws on the side to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.

$19.99
Quantity
Leapers RGPMOFS38-25H4 1 Piece Mount

Fixed 1 Piece High 1" (Rings) 11mm (Base) Mount

These mounts are designed to be used with very long or very short, compact scopes that have a one inch tube body and an objective up to 50 mm. This mount is great with airguns as it has two integral recoil pins which can be used to prevent the mount from sliding. The stop pins are built into the base of the mount and are threaded. They are adjusted from the top using an allen wrench (provided with mount) and either recoil pin can be used. The one that is not needed can simply be screwed up into the mount body. The reason the mount has two stop pins is that the offset can be pointed forward if used with long scopes or backwards if used with short compact scopes and the two stop pins allow one or the other recoil pin to be in position regardless of the offset direction. The four screws on the split rings and two clamping screws on the side give a secure grip when used on guns with even the most punishing recoil.

$21.95
Quantity
RWS 230-0596 1 Piece Mount 1"

Fixed 1 Piece High 1" (Rings) 11mm (Base) Drooper Mount

These mounts are designed specifically to be used with RWS rifles. RWS rifles are known to have barrel droop and these mounts were designed to counteract the droop. The mounts are fixed so there are no small screws to loosen up over time and there is .025" of droop compensation built in. The mounts also feature 2 stop pins that lower into the 2 indentations on RWS scope rails.  The mount is available with 1" rings or 30mm rings.

$35.00
Quantity
RWS 230-0597 1 Piece Mount 30mm

Fixed 1 Piece High 30mm (Rings) 11mm (Base) Drooper Mount

These mounts are designed specifically to be used with RWS rifles. RWS rifles are known to have barrel droop and these mounts were designed to counteract the droop. The scopes are fixed so there are no small screws to loosen up over time and there is .025" of droop compensation built in. The mounts also feature 2 stop pins that lower into the 2 indentations on RWS scope rails. The mount is available with 1" rings or 30mm rings.

$35.00
Quantity
Sun Optics 7101 1 Piece Mount

Adjustable 1 Piece Medium 1" (Rings) 11mm (Base) Mount

Finely machined and tooled mounts. Much less likely to "crunch" the scope tube. The Euro-style wrap-around ring design virtually eliminates overtightening problems leading to broken scopes. This particular model is adjustable. You can compensate for barrel droop using the built-in adjustments. One piece mounts allow for the maximum holding power virtually eliminating scope creep and broken scopes. We recommend this scope mount for any airgun with barrel droop or anytime you want one of the finest mounts available. Highly recommended for use with RWS rifles.

$29.95
Quantity
Sun Optics 7130 1 Piece 30mm Adjustable Mount

Adjustable 1 Piece Medium 30mm (Rings) 11mm (Base) Mount

Finely machined and tooled mounts. Much less likely to "crunch" the scope tube. The Euro-style wrap-around ring design virtually eliminates overtightening problems leading to broken scopes. This particular model is adjustable. You can compensate for barrel droop using the built-in adjustments. One piece mounts allow for the maximum holding power virtually eliminating scope creep and broken scopes. We recommend this scope mount for any airgun with barrel droop or anytime you want one of the finest mounts available. Highly recommended for use with RWS rifles.

$29.95
Quantity
Sun Optics 7701 1 Piece 1" High Adjustable Mount

Adjustable 1 Piece High 1" (Rings) 11mm (Base) Mount

Finely machined and tooled mounts. Much less likely to "crunch" the scope tube. The Euro-style wrap-around ring design virtually eliminates overtightening problems leading to broken scopes. This particular model is adjustable. You can compensate for barrel droop using the built-in adjustments. One piece mounts allow for the maximum holding power virtually eliminating scope creep and broken scopes. We recommend this scope mount for any airgun with barrel droop or anytime you want one of the finest mounts available. Highly recommended for use with RWS rifles.

$49.95
Quantity
Sun Optics 7702 1 Piece 1" Ultra High Adjustable Mount

Adjustable 1 Piece Ultra High 1" (Rings) 11mm (Base) Mount

Finely machined and tooled mounts. Much less likely to "crunch" the scope tube. The Euro-style wrap-around ring design virtually eliminates overtightening problems leading to broken scopes. This particular model is adjustable. You can compensate for barrel droop using the built-in adjustments. One piece mounts allow for the maximum holding power virtually eliminating scope creep and broken scopes. We recommend this scope mount for any airgun with barrel droop or anytime you want one of the finest mounts available. Highly recommended for use with RWS rifles.

$49.95
Quantity
Sun Optics 7900 1 Piece Riser

Fixed 1 Piece Medium Weaver (Top) Barrel Grip (Base) IZH-46M Pistol Rail

This item was designed for the IZH-46M pistol. It allows for the addition of a scope mount. This, in turn, allows for the mounting of a scope or red dot for more shooting fun and greater accuracy

$29.99
Quantity

Bestsellers

BKL-260H 1 Piece Mount

Fixed 1 Piece High 1" (Rings) 11mm (Base) Mount

General Features

  • Overall length: 4"
  • Clamp length: 4"
  • Ring width: 0.6"
  • Base of mount to bottom of scope tube: 0.974"
  • Turret clearance: 0.125"
  • Weight: 5.1 oz.

When it comes to holding power there is no better mount on the market than the BKL-260.  Put this, one piece six screw scope mount on any magnum airgun, elephant gun or sherman tank and forget about it, this mount is not going anywhere. 

BKL offers the 260, 1 piece scope mounts in 3 configurations. Choose between the medium, high or drooper version. These mounts all have 6 side screws to solidly fasten the mount onto the dovetail or scope rail. These mounts are ultra sturdy, dependable and have great holding power. Once tightened onto a dovetail or scope rail, they simply don't move.  Combine the griping power with the self centering mounting system and they do not come any better than the BKL line of mounts

The 260 is a medium high fixed mount to be used with scopes objectives up to 45mm
The 260H is a high fixed mount to be used with scopes objectives up to 56mm
The 260D7 is a high mount with .007" droop compensation built in and can be used with scopes objectives up to 56mm

The BKL 260H is .2" Taller than standard height BKL-260

$52.25
$55.00 (save 5 %)
Quantity
Beeman 5039 1 Piece Mount

Adjustable 1 Piece High 1 Inch (Rings) 11mm (Base) Mount

This one piece double screw mount is adjustable for windage and elevation. It's suitable for all spring guns or semi auto rimfire rifles as well as some pre-charged pneumatic air rifles.  The maximum amount of adjustment is 2mm from one end of the mount to the other.  This applies to the windage and elevation and  60mm diameter objective lens will clear on most rifles.  Removable arrestor pin included.

Also sold as the Sportmatch APO55 1 piece adjustable mount.

$65.00
Quantity
RWS 230-0596 1 Piece Mount 1"

Fixed 1 Piece High 1" (Rings) 11mm (Base) Drooper Mount

These mounts are designed specifically to be used with RWS rifles. RWS rifles are known to have barrel droop and these mounts were designed to counteract the droop. The mounts are fixed so there are no small screws to loosen up over time and there is .025" of droop compensation built in. The mounts also feature 2 stop pins that lower into the 2 indentations on RWS scope rails.  The mount is available with 1" rings or 30mm rings.

$35.00
Quantity
RWS 230-0597 1 Piece Mount 30mm

Fixed 1 Piece High 30mm (Rings) 11mm (Base) Drooper Mount

These mounts are designed specifically to be used with RWS rifles. RWS rifles are known to have barrel droop and these mounts were designed to counteract the droop. The scopes are fixed so there are no small screws to loosen up over time and there is .025" of droop compensation built in. The mounts also feature 2 stop pins that lower into the 2 indentations on RWS scope rails. The mount is available with 1" rings or 30mm rings.

$35.00
Quantity
BKL-354 1 Piece Mount

Fixed 1 Piece Medium 30mm (Rings) 11mm (Base) Offset Mount

The BKL 354 1 piece, 30mm cantilevered (offset) scope mounts is excellent for use with very short scopes. Very often short scopes cannot be pulled back far enough to allow for proper eye relief. Using an offset (cantilevered) mount allows the scope to be mounted farther back than is possible with a standard mount.

These mounts are sturdy, dependable and have great holding power.   The 354 is a medium high fixed mount to be used with scopes tobjectives up to 45mm

$57.00
$60.00 (save 5 %)
Quantity
BKL-254 1 Piece Mount

Fixed 1 Piece Medium 1" (Rings) 11mm (Base) Offset Mount

BKL offers the 254 1 piece, cantilevered scope mounts in 3 configurations. Choose between the fixed medium, high or drooper version. The offset (cantilevered) mounts are excellent for use with very short scopes. Very often short scopes cannot be pulled back far enough to allow for proper eye relief. Using an offset (cantilevered) mount allow the scope to be mounted farther back than is possible with a standard mount.
These mounts are sturdy, dependable and have great holding power.
The 254 is a medium high fixed mount to be used with scopes tobjectives up to 45mm
The 254H is a high fixed mount to be used with scopes objectives up to 56mm
The 254D7 is a high mount with .007" droop compensation built in and can be used with scopes objectives up to 56mm

$38.00
Quantity
BKL-288 1 Piece Adjustable Mount

BKL-288 1 Piece 1" Adjustable Mount

BKL Technologies, the Rimfire and Airgun Mount Specialist, is expanding the world’s largest selection of airgun & rimfire dovetail mounting solutions to include an Adjustable Scope Mount System. Featuring BKL’s patented Auto- Centering and Clamp Spreading technology, this mount is ideal for rifles that need additional scope elevation adjustment and for those trying to keep their crosshairs optically centered in the scope tube. The BKL adjustable mount system is a significant improvement over traditional adjustable scope mounts available on the market today; this design incorporates side rails for mounting additional shooting accessories, a lower profile than usually achievable in an adjustable mount, 2.5 inches of clamping length with six clamping screws, and availability for 1 inch or 30mm scope tubes.

$66.50
Quantity