Home :: Mounts/Risers

Mounts/Risers

BKL 263H 2 Piece Mounts

Fixed 2 Piece  High 1" (Rings) 11mm (Base) Mounts

BKL offers the 263 2 piece scope mount in 2 configurations. Choose between the fixed medium or high version. The mounts all solidly fasten onto the dovetail or scope rail. These mounts, like all BKL mounts are sturdy and strong. Once tightened onto a dovetail or scope rail, they simply don't move.
The 263 is a medium high 2 pc. fixed mount to be used with scopes tobjectives up to 45mm
The 263H is a high fixed mount to be used with scopes objectives up to 56mm

$25.95
$42.50 (save 39 %)
Quantity
BKL 301 2 Piece Mounts

Fixed 2 Piece High 30mm (Rings) 11mm (Base) Doublestrap Mounts

In stock

 

General Features

  • Overall length: 1"
  • Clamp length: 1"
  • Ring width: 1"
  • Weight: 4.4 oz.



The BKL Model 301 a two piece set of mounts ideal for long scopes where you want to spread out the support along a long scope tube.  The BKL-301is a sturdy double-strap set of rings good for all rifles and shooters.  With plenty of clamping power and a self centering design this mount is must for the serious shooter.

$36.95
$60.00 (save 38 %)
Quantity
BKL 466S 2 Piece Risers

Fixed 2 Piece Medium 14mm to 11mm Riser-Silver

The 466S is a 2 pc. 14mm to 11mm riser meant to fit on guns that have 14mm scope rails rather than the standard 11mm rails or dovetails. Beeman P1's and P11's, for instance, have 14mm dovetails making it hard to use a scope or red dot. But not any more. Just put on this riser and use any standard 11mm mount on the top of the riser. This product will also give a little extra height for the gun's mount whenever extra height is wanted or needed. These risers, being very short in length work beautifully with 2 pc mounts.

$17.95
Quantity
FX No Limit Picatinny Mount 2 pc 1" Adjustable

Adjustable 2 Piece High 1" (Rings) Picatinny (Base) Mounts

Easy to adjust for droop (elevation). These FX mounts are double screw, for use with weaver mounting rails and 1" tube bodies.

$69.99
$89.99 (save 22 %)
Quantity
Leapers RGPM-25H4 2 Piece Mounts

Fixed 2 Piece High 1" 11mm Mounts

These Leapers mounts are designed to be used with all scopes that have a 1 Inch tube body and an objective up to 56 mm. They are great with airguns as they have an integral recoil pin (used to prevent scope slippage) built into the base of one of the mounts, but the pin can be screwed up and out of the way for those who do not need to use this feature. Each ring has 4 screws to hold the scope firmly in place and the base has two heavy duty screws on the side to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.

$19.99
Quantity
Leapers RGPM-30H4 2 Piece Mounts

Fixed, 2 Piece High 30mm (Rings) 11mm (Base) Mount

These Leapers mounts are designed to be used with all scopes that have a 30mm tube body and an objective up to 72 mm. They are great with airguns as they have an integral recoil pin (used to prevent scope creep) built into the base of one of the mounts, but the pin can be screwed up and out of the way for those who do not need to use this feature. Each ring has 4 screws to hold the scope firmly in place and the base has two heavy duty screws on the side to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.

$19.99
Quantity
Leapers RGPM-30M4 2 Piece Mounts

Fixed 2 Piece Medium 30mm (Rings) 11mm (Base) Mounts

These Leapers mounts are designed to be used with all scopes that have a 30mm tube body and an objective up to 45 mm. They are great with airguns as they have an integral recoil pin (used to prevent scope creep) built into the base of one of the mounts, but the pin can be screwed up and out of the way for those who do not need to use this feature. Each ring has 4 screws to hold the scope firmly in place and the base has two heavy duty screws on the side to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.

$19.99
Quantity
Leapers RGWM-25M4 2 Piece Mounts

Fixed 2 Piece Medium 1" Weaver Mount

These Leapers mounts are designed to be used in conjunction with the Leapers Drooper mount base and with all scopes that have a 1 Inch tube body and an objective up to 45 mm. They are great with airguns as the Weaver base doesn't allow the rings to slip and slide. Each ring has 4 screws to hold the scope firmly in place when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as other mount available at higher prices.

$12.95
Quantity
Leapers RGWM-30L4 2 Piece Mounts

Fixed 2 Piece Low 30mm (Rings) Weaver (Base) Mounts

These Leapers mounts are designed to be used in conjunction with the Leapers Drooper mount base and with all scopes that have a 30mm tube body and an objective up to 40 mm. They are great with airguns as the Weaver base doesn't allow the mounts to slip and slide. Each ring has 4 screws to hold the scope firmly in place when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as other mount available at higher prices.

$6.95
Quantity
Leapers RGWM-30M4 2 Piece Mounts

Fixed 2 Piece Medium 30mm (Rings) Weaver (Base) Mounts

These Leapers mounts are designed to be used with all scopes that have a 30mm tube body and an objective up to 45 mm. They are great with airguns as they have an integral recoil pin (used to prevent scope creep) built into the base of one of the mounts, but the pin can be screwed up and out of the way for those who do not need to use this feature. Each ring has 4 screws to hold the scope firmly in place and the base has two heavy duty screws on the side to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.

$12.95
Quantity
RWS 230-0597 1 Piece Mount 30mm

Fixed 1 Piece High 30mm (Rings) 11mm (Base) Drooper Mount

Clearance Priced

These mounts are designed specifically to be used with RWS rifles. RWS rifles are known to have barrel droop and these mounts were designed to counteract the droop. The scopes are fixed so there are no small screws to loosen up over time and there is .025" of droop compensation built in. The mounts also feature 2 stop pins that lower into the 2 indentations on RWS scope rails. The mount is available with 1" rings or 30mm rings.

$15.00
Quantity

Bestsellers

BKL 301 2 Piece Mounts

Fixed 2 Piece High 30mm (Rings) 11mm (Base) Doublestrap Mounts

In stock

 

General Features

  • Overall length: 1"
  • Clamp length: 1"
  • Ring width: 1"
  • Weight: 4.4 oz.



The BKL Model 301 a two piece set of mounts ideal for long scopes where you want to spread out the support along a long scope tube.  The BKL-301is a sturdy double-strap set of rings good for all rifles and shooters.  With plenty of clamping power and a self centering design this mount is must for the serious shooter.

$36.95
$60.00 (save 38 %)
Quantity
Leapers RGPM-30H4 2 Piece Mounts

Fixed, 2 Piece High 30mm (Rings) 11mm (Base) Mount

These Leapers mounts are designed to be used with all scopes that have a 30mm tube body and an objective up to 72 mm. They are great with airguns as they have an integral recoil pin (used to prevent scope creep) built into the base of one of the mounts, but the pin can be screwed up and out of the way for those who do not need to use this feature. Each ring has 4 screws to hold the scope firmly in place and the base has two heavy duty screws on the side to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.

$19.99
Quantity
Leapers RGPM-30M4 2 Piece Mounts

Fixed 2 Piece Medium 30mm (Rings) 11mm (Base) Mounts

These Leapers mounts are designed to be used with all scopes that have a 30mm tube body and an objective up to 45 mm. They are great with airguns as they have an integral recoil pin (used to prevent scope creep) built into the base of one of the mounts, but the pin can be screwed up and out of the way for those who do not need to use this feature. Each ring has 4 screws to hold the scope firmly in place and the base has two heavy duty screws on the side to give a secure grip when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as any other mount available at higher prices.

$19.99
Quantity
Leapers RGWM-30L4 2 Piece Mounts

Fixed 2 Piece Low 30mm (Rings) Weaver (Base) Mounts

These Leapers mounts are designed to be used in conjunction with the Leapers Drooper mount base and with all scopes that have a 30mm tube body and an objective up to 40 mm. They are great with airguns as the Weaver base doesn't allow the mounts to slip and slide. Each ring has 4 screws to hold the scope firmly in place when used on guns with even the most punishing recoil. Don't let the price fool you. They are as heavy duty and as well built as other mount available at higher prices.

$6.95
Quantity
RWS 230-0597 1 Piece Mount 30mm

Fixed 1 Piece High 30mm (Rings) 11mm (Base) Drooper Mount

Clearance Priced

These mounts are designed specifically to be used with RWS rifles. RWS rifles are known to have barrel droop and these mounts were designed to counteract the droop. The scopes are fixed so there are no small screws to loosen up over time and there is .025" of droop compensation built in. The mounts also feature 2 stop pins that lower into the 2 indentations on RWS scope rails. The mount is available with 1" rings or 30mm rings.

$15.00
Quantity
BKL 263H 2 Piece Mounts

Fixed 2 Piece  High 1" (Rings) 11mm (Base) Mounts

BKL offers the 263 2 piece scope mount in 2 configurations. Choose between the fixed medium or high version. The mounts all solidly fasten onto the dovetail or scope rail. These mounts, like all BKL mounts are sturdy and strong. Once tightened onto a dovetail or scope rail, they simply don't move.
The 263 is a medium high 2 pc. fixed mount to be used with scopes tobjectives up to 45mm
The 263H is a high fixed mount to be used with scopes objectives up to 56mm

$25.95
$42.50 (save 39 %)
Quantity
FX No Limit Picatinny Mount 2 pc 1" Adjustable

Adjustable 2 Piece High 1" (Rings) Picatinny (Base) Mounts

Easy to adjust for droop (elevation). These FX mounts are double screw, for use with weaver mounting rails and 1" tube bodies.

$69.99
$89.99 (save 22 %)
Quantity